High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy

被引：162

作者：

Kim, Young-Kyun ^{[1
]}

Joo, Yeun-Ah ^{[1
]}

Kim, Hyoung Seop ^{[2
]}

Lee, Kee-Ahn ^{[1
]}

机构：

[1] Inha Univ, Dept Mat Sci & Engn, Incheon 22212, South Korea

[2] POSTECH, Dept Mat Sci & Engn, Pohang 37673, South Korea

来源：

INTERMETALLICS | 2018年 / 98卷

关键词：

High entropy alloy; High temperature oxidation; Single solid solution phase; Microstructure; Oxidation behavior; PHASE-FORMATION; CRMNFECONI; MICROSTRUCTURE; STRESS;

D O I：

10.1016/j.intermet.2018.04.006

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This study examined the surface oxidation properties of Cr-Mn-Fe-Co-Ni high entropy alloy (HEA) at high temperatures (900 degrees C, 1000 degrees C, 1100 degrees C/24 h) in the 21%O-2 and 79%N-2 atmosphere. An initial observation of microstructures confirmed that they consisted of random FCC solid solution, and the average grain size was measured at 245.5 pm. High-temperature oxidation tests of the Cr-Mn-Fe-Co-Ni HEA showed that its weight gained by 1.76, 4.45, and 9.08 mg/cm(2) at 900 degrees C, 1000 degrees C, and 1100 degrees C, respectively, and all three temperature conditions represented typical parabolic curves. Observation of its surface found that Cr2O3 and Mn2O3 were main oxides on a specimen tested at 900 degrees C, while (Mn, Cr)(3)O-4 and Mn3O4 were mostly shown to be main oxides on a specimen tested at 1000 degrees C and 1100 degrees C, despite the presence of Cr2O3. The high-temperature oxidation behavior of Cr-Mn-Fe-Co-Ni HEAs was found to have been largely affected by Cr and Mn elements. The resultant kirkendall pore generation, change in the concentration of elements, internal oxidation and Mn2O3-o Mn3O4 transformation were found to affect the oxidation resistance of Cr-Mn-Fe-Co-Ni high entropy alloy.

引用

页码：45 / 53

页数：9

共 28 条

[1] Microstructural development in equiatomic multicomponent alloys [J].

Cantor, B ;

Chang, ITH ;

Knight, P ;

Vincent, AJB .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218

[2] Recent progress in multi-element alloy and nitride coatings sputtered from high-entropy alloy targets [J].

Cheng, Keng-Hao ;

Lai, Chia-Han ;

Lin, Su-Jien ;

Yeh, Jien-Wei .

ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2006, 31 (06) :723-736

[3] Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in chloride-containing sulphate solutions [J].

Chou, Y. L. ;

Wang, Y. C. ;

Yeh, J. W. ;

Shih, H. C. .

CORROSION SCIENCE, 2010, 52 (10) :3481-3491

[4] HIGH-TEMPERATURE OXIDATION OF IRON-CHROMIUM-NICKEL ALLOYS CONTAINING 330PERCENT CHROMIUM [J].

CROLL, JE ;

WALLWORK, GR .

OXIDATION OF METALS, 1972, 4 (03) :121-&

[5] Tensile properties of high- and medium-entropy alloys [J].

Gali, A. ;

George, E. P. .

INTERMETALLICS, 2013, 39 :74-78

[6] A fracture-resistant high-entropy alloy for cryogenic applications [J].

Gludovatz, Bernd ;

Hohenwarter, Anton ;

Catoor, Dhiraj ;

Chang, Edwin H. ;

George, Easo P. ;

Ritchie, Robert O. .

SCIENCE, 2014, 345 (6201) :1153-1158

[7]

Greenwood NN., 1997, Chemistry of the Elements

[8] Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys [J].

Guo, Sheng ;

Ng, Chun ;

Lu, Jian ;

Liu, C. T. .

JOURNAL OF APPLIED PHYSICS, 2011, 109 (10)

[9] Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures [J].

He, J. Y. ;

Zhu, C. ;

Zhou, D. Q. ;

Liu, W. H. ;

Nieh, T. G. ;

Lu, Z. P. .

INTERMETALLICS, 2014, 55 :9-14

[10] Oxidation of CoCrFeMnNi High Entropy Alloys [J].

Holcomb, Gordon R. ;

Tylczak, Joseph ;

Carney, Casey .

JOM, 2015, 67 (10) :2326-2339

← 1 2 3 →