Coupling of superduplex stainless steel and cast nickel-aluminium bronze in sea water

被引：5
作者：
Francis, R [1 ]
机构：
[1] Weir Mat & Foundries, Pk Works, Manchester M40 2BA, Lancs, England
来源：
BRITISH CORROSION JOURNAL | 1999年 / 34卷 / 02期
关键词：
D O I：
10.1179/000705999101500789
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tests have been performed at about 25 degrees C in both natural and chlorinated sea waters on couples of nickel-alminium bronze (NAB) and Zeron 100 (Z100) superduplex stainless steel. Two NAB/Z100 area ratios (1 : 1 and 1 : 10) were used in exposures of 60 days. The results in natural sea water showed severe localised corrosion of NAB both in the crevices and on open surfaces at both area ratios. In chlorinated sea water there was no corrosion at a 1 : 1 area ratio. The attack is explained in terms of the different cathodic reactions occurring in natural and chlorinated sea waters, and the metallurgical structure of: NAB. Service experiences with couples of NAB and superduplex stainless steel are described and recommendations are given for the avoidance of problems.
引用
收藏
页码：139 / 144
页数：6
相关论文
共 50 条
  • [41] Wear of aluminium bronze in sliding contact with lubricated stainless steel sheet material
    van der Heide, E.
    Stam, E. D.
    Giraud, H.
    Lovato, G.
    Akdut, N.
    Clarysse, F.
    Caenen, P.
    Heikilla, I.
    WEAR, 2006, 261 (01) : 68 - 73
  • [42] On cavitation erosion behavior of friction stir processed surface of cast nickel aluminium bronze
    Thapliyal, Shivraman
    Dwivedi, Dheerendra Kumar
    WEAR, 2017, 376 : 1030 - 1042
  • [43] Tribological characteristics of nickel-aluminium bronze CuAl10Ni5Fe4 against 30CrMnSiA steel after the prior corrosion treatment
    Tan, Zhihai
    Guo, Qiang
    Zhai, Wenkai
    Zhao, Zhengping
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 73 - 77
  • [44] Microstructure, mechanical and tribological properties of nickel-aluminium bronze alloys developed via gas-atomization and spark plasma sintering
    Zhai, Wenzheng
    Lu, Wenlong
    Zhang, Po
    Zhou, Mingzhuo
    Liu, Xiaojun
    Zhou, Liping
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707 : 325 - 336
  • [45] Comparison between tribocorrosion behaviour of aluminium bronze and leaded tin bronze in simulated sea water
    Huttunen-Saarivirta E.
    Tribologia, 2019, 36 (01): : 62 - 64
  • [46] BEHAVIOUR OF STAINLESS STEEL IN SEA-WATER
    不详
    ANTI-CORROSION, 1967, 14 (07): : 9 - &
  • [47] Further studies into the flow corrosion cathodic mass transfer kinetics of copper and nickel-aluminium bronze wall-jet electrodes
    Barik, R. C.
    Wharton, J. A.
    Wood, Rjk
    Stokes, K. R.
    CORROSION SCIENCE, 2020, 170
  • [48] EROSION RESISTANCE OF 18-PERCENT CR CAST STAINLESS-STEEL IN SEA-WATER
    ONO, S
    SAITO, M
    MATSUO, S
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1993, 57 (03) : 307 - 311
  • [49] Correlating shrinkage microporosity with the mechanical properties of sand-cast superduplex stainless steel using a numerical/experimental approach
    Palumbo, Gianfranco
    Piglionico, Vito
    Sorgente, Donato
    Piccininni, Antonio
    Guglielmi, Pasquale
    Tricarico, Luigi
    MATERIALS & DESIGN, 2016, 93 : 168 - 179
  • [50] FOULING OF TITANIUM AND STAINLESS STEEL IN SEA WATER
    Szymlek, K.
    Kania, C.
    ADVANCES IN MATERIALS SCIENCE, 2009, 9 (02): : 41 - 50
12345