Mechanical properties of TiC-reinforced H13 steel by bionic laser treatment

被引：14
作者：
Meng, Chao [1 ]
Cao, Rui [1 ]
Li, Jingyue [1 ]
Geng, Fuyang [1 ]
Zhang, Yuwei [1 ]
Wu, Chun [1 ]
Wang, Xuelei [1 ]
Zhuang, Weibin [1 ]
机构：
[1] Liaoning Tech Univ, Sch Mat Sci & Engn, Fuxin 123000, Peoples R China
来源：
OPTICS AND LASER TECHNOLOGY | 2021年 / 136卷
关键词：
Bionic; Laser; Mechanical properties; Tensile; Wear; Microstructure; FATIGUE WEAR-RESISTANCE; THERMAL FATIGUE; COMPOSITE COATINGS; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1016/j.optlastec.2020.106815
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In order to further improve the service life of H13 steel, bionic laser surface treatment was performed on the surface of H13 steel. The mechanical properties and microstructures of H13 steel processed by bionic laser surface alloying with different fractions of TiC particulates were investigated. With increasing TiC fraction, the microstructure and microhardness of laser alloying zone were further refined and increased. The tensile strength increased gradually with increasing TiC fraction. The fracture characteristics were also affected by the particulate fraction. The wear resistance increased first and then decreased with increasing TiC fraction. In addition, the enhancement mechanisms of mechanical properties are discussed.
引用
收藏
页数：8
相关论文
共 27 条
  • [1] Sliding wear of CrN, AlCrN and AlTiN coated AISI H13 hot work tool steels in aluminium extrusion
    Birol, Yucel
    [J]. TRIBOLOGY INTERNATIONAL, 2013, 57 : 101 - 106
  • [2] The comparative study of W/Cr addition in Fe-base by laser surface alloying on fatigue wear resistance of GCI
    Chen, Zhi-kai
    Meng, Chao
    Dong, Ji-xing
    Zhou, Ti
    Tong, Xin
    Zhou, Hong
    [J]. SURFACE & COATINGS TECHNOLOGY, 2016, 286 : 25 - 35
  • [3] Influence of Orientations of Bionic Unit Fabricated by Laser Remelting on Fatigue Wear Resistance of Gray Cast Iron
    Chen, Zhi-Kai
    Zhou, Ti
    Zhang, Hai-feng
    Yang, Wan-shi
    Zhou, Hong
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (06) : 2511 - 2520
  • [4] Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating
    Dadoo, Ali
    Boutorabi, Seyyed Mohammad Ali
    [J]. OPTICS AND LASER TECHNOLOGY, 2020, 127
  • [5] Effect of titanium carbide concentration on the morphology of MC carbides in pulsed laser surface alloyed AISI H13 tool steel
    Dadoo, Ali
    Boutorabi, Seyyed Mohammad Ali
    Kheirandish, Shahram
    [J]. OPTICS AND LASER TECHNOLOGY, 2019, 112 : 236 - 244
  • [6] Microstructure, Wear, and Corrosion Characteristics of TiC-Laser Surface Cladding on Low-Carbon Steel
    El-Labban, Hashem F.
    Mahmoud, Essam Rabea Ibrahim
    Algahtani, Ali
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (02): : 974 - 982
  • [7] Characterization of local mechanical properties of laser-cladding H13-TiC composite coatings using nanoindentation and finite element analysis
    Gu, ShengTing
    Chai, GuoZhong
    Wu, HuaPing
    Bao, YuMei
    [J]. MATERIALS & DESIGN, 2012, 39 : 72 - 80
  • [8] The Relationship Between Oxidation and Thermal Fatigue of Martensitic Hot-Work Die Steels
    Jiang, Qi-Chuan
    Zhao, Xu-Min
    Qiu, Feng
    Ma, Tian-Ning
    Zhao, Qing-Long
    [J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2018, 31 (07) : 692 - 698
  • [9] Structural basis for the fracture toughness of the shell of the conch Strombus gigas
    Kamat, S
    Su, X
    Ballarini, R
    Heuer, AH
    [J]. NATURE, 2000, 405 (6790) : 1036 - 1040
  • [10] Effect of initial hardness on the thermal fatigue behavior of AISI H13 steel by experimental sand numerical investigations
    Li, J.
    Shi, Y.
    Wu, X.
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (06) : 1260 - 1274
123