Microstructure of (Hf-Ta-Zr-Nb)C high-entropy carbide at micro and nano/atomic level

A High Entropy (Hf-Ta-Zr-Nb)C Ultra-High Temperature Ceramic (UHTC) was fabricated by ball milling and Spark Plasma Sintering (SPS) with a density of 99%. The microstructure characteristics were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) in combination with electron back scattered diffraction (EBSD) and transmission electron microscopy (TEM). Atomic structure and local chemical disorder was determined by means of scanning transmission electron microscopy (STEM) in conjunction with energy dispersive X-ray spectroscopy (EDS). According to the results, high purity, dense and homogeneous high entropy carbide with Fm-3 m crystal structure was successfully produced. The grain size ranged from approximately 5 mu m to 25 mu m with average grain size of 12 mu m. Chemical analyses proved that all grains had the same chemical composition at the micro as well as on the nano/atomic level without any detectable segregation. The approximately 1.5 nm thin amorphous grain boundary phase contained impurities that came from the starting powders and the ball milling process.