Analysis of Voltage Sag Severity Case Study in an Industrial Circuit

This paper presents the results of a power quality study carried out in an industrial distribution system. The main objective of this study was to quantify the negative impact caused by voltage sags in industrial processes and its relationship to generated interruptions. A series of measurements of power quality variations were taken at the substation that feeds the circuit and at the point-of-common coupling of each industrial user. The new standard IEEE Std 1564-2014 "Guide for Voltage Sag Indices" was used to determine the indicators to assess the severity of voltage sags and also the calculation method. Sag severity was selected as it allows the calculation of the probability of voltage sags to generate interruptions in industrial processes or electrical equipment. Thus, an analysis of the quality of the supply voltage can be done. Severity was initially calculated at the substation that feeds the industrial circuit and later, at the point-of-common coupling of each user. Subsequently, the relationship between user interruptions and severity values was determined. Finally, recommendations of good engineering practices in industrial processes were done.