Fabrication and characterization of an anode-supported hollow fiber SOFC

被引：105

作者：

Yang, Chunli ^{[1
]}

Li, Wei ^{[1
]}

Zhang, Shangquan ^{[1
]}

Bi, Lei ^{[1
]}

Peng, Ranran ^{[1
]}

Chen, Chusheng ^{[1
]}

Liu, Wei ^{[1
]}

机构：

[1] Univ Sci & Technol China, Lab Adv Funct Mat & Devices, Dept Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China

来源：

JOURNAL OF POWER SOURCES | 2009年 / 187卷 / 01期

关键词：

Solid oxide fuel cells; Ni-YSZ anode-supported; Hollow-fiber; Phase inversion; OXIDE FUEL-CELL; MICRO TUBULAR SOFCS; INTERMEDIATE TEMPERATURE; OPERATION; PERFORMANCE;

D O I：

10.1016/j.jpowsour.2008.10.069

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

In this study, an anode-supported hollow-fiber solid oxide fuel cell (SOFC) of diameter 1.7 mm has been successfully fabricated using the phase inversion and vacuum assisted coating techniques. The cell has a special structure consisting of a 12-mu m-thick yttria-stabilized zirconia (YSZ) electrolyte film and a Ni-YSZ anode layer which has large finger-like pores on both sides of the hollow-fiber membrane. The hollow-fiber SOFC has an active electrode area of 0.63 cm(2) and generates maximum power densities of 124, 287 and 377 mW cm(-2) at 600, 700 and 800 degrees C, respectively, indicating that its use in applications requiring high power density is promising. (c) 2008 Elsevier B.V. All rights reserved.

引用

页码：90 / 92

页数：3

共 50 条

[31] Low-temperature fabrication of an anode-supported SOFC with a proton-conducting electrolyte based on lanthanum scandate using a PLD method
Iguchi, Fumitada
Yamane, Takuya
Kato, Hisashi
Yugami, Hiroo
SOLID STATE IONICS, 2015, 275 : 117 - 121
[32] Fabrication and evaluation of NiO/Y2O3-stabilized-ZrO2 hollow fibers for anode-supported micro-tubular solid oxide fuel cells
Zhen, Shuying
Sun, Wang
Tang, Guangze
Rooney, David
Sun, Kening
Ma, Xinxin
CERAMICS INTERNATIONAL, 2016, 42 (07) : 8559 - 8564
[33] Improvement on the design and fabrication of planar SOFCs with anode-supported cells based on modified button cells
Nguyen, Xuan-Vien
Chang, Chang-Tsair
Jung, Guo-Bin
Chan, Shih-Hung
Yeh, Chia-Chen
Yu, Jyun-Wei
Lee, Chi-Yuan
RENEWABLE ENERGY, 2018, 129 : 806 - 813
[34] CFD modeling considering different kinetic models for internal reforming reactions in an anode-supported SOFC
Paradis, Hedvig
Andersson, Martin
Yuan, Jinliang
Sunden, Bengt
PROCEEDINGS OF THE ASME 8TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY 2010, VOL 2, 2010, : 55 - 64
[35] Influence of Deposition Temperature of GDC Interlayer Deposited by RF Magnetron Sputtering on Anode-Supported SOFC
Wu, W.
Wang, X.
Liu, Z.
Zhao, Z.
Ou, D.
Tu, B.
Cheng, M.
FUEL CELLS, 2014, 14 (02) : 171 - 176
[36] Effect of cathode fabrication method on characteristics of anode-supported tubular solid oxide fuel cells
Liu, Renzhu
Zhao, Chunhua
Li, Junliang
Cai, Guoqiang
Wang, Shaorong
Wen, Tinglian
Wen, Zhaoyin
ELECTROCHIMICA ACTA, 2010, 55 (06) : 2134 - 2138
[37] Fabrication and Characterization of Anode Supported YSZ/GDC Bilayer Electrolyte SOFC Using Dry Press Process
Choi, Hoon
Cho, Gu Young
Cha, Suk-Won
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2014, 1 (02) : 95 - 99
[38] A novel single-step fabrication anode/electrolyte/cathode triple-layer hollow fiber micro-tubular SOFC
Jamil, Siti Munira
Othman, Mohd Hafiz Dzarfan
Mohamed, Mohd Hilmi
Adam, Mohd Ridhwan
Rahman, Mukhlis A.
Jaafar, Juhana
Ismail, Ahmad Fauzi
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2018, 43 (39) : 18509 - 18515
[39] A CASE STUDY OF USING ENHANCED INTERCONNECT CHANNEL GEOMETRIES ON HEAT AND MASS TRANSFER CHARACTERISTICS OF ANODE-SUPPORTED PLANAR SOFC
Magar, Yogesh N.
Manglik, Raj M.
JOURNAL OF ENHANCED HEAT TRANSFER, 2015, 22 (02) : 121 - 145
[40] An anode-supported hollow fiber solid oxide fuel cell with (Pr0.5Nd0.5)0.7Sr0.3MnO3-δ-YSZ composite cathode
Zhang, Xiaozhen
Lin, Bin
Ling, Yihan
Dong, Yingchao
Meng, Guangyao
Liu, Xingqin
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 497 (1-2) : 386 - 389

← 1 2 3 4 5 →