Friction Welding of Aluminium and Aluminium Alloys with Steel

被引：41

作者：

Ambroziak, Andrzej ^{[1
]}

Korzeniowski, Marcin ^{[1
]}

Kustron, Pawel ^{[1
]}

Winnicki, Marcin ^{[1
]}

Sokolowski, Pawel ^{[1
]}

Harapinska, Ewa ^{[1
]}

机构：

[1] Wroclaw Univ Technol, Inst Prod Engn & Automat, Welding Technol Dept, PL-50370 Wroclaw, Poland

来源：

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING | 2014年 / 2014卷

关键词：

Friction welding - Friction - Dissimilar materials - Tensile testing - Bending tests;

D O I：

10.1155/2014/981653

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents our actual knowledge and experience in joining dissimilar materials with the use of friction welding method. The joints of aluminium and aluminium alloys with the different types of steel were studied. The structural effects occurring during the welding process were described. The mechanical properties using, for example, (i) microhardness measurements, (ii) tensile tests, (iii) bending tests, and (iv) shearing tests were determined. In order to obtain high-quality joints the influence of different configurations of the process such as (i) changing the geometry of bonding surface, (ii) using the interlayer, or (iii) heat treatment was analyzed. Finally, the issues related to the selection of optimal parameters of friction welding process were also investigated.

引用

页数：15