Long-term creep and creep rupture characteristics of TiAl-base intermetallics

被引:19
作者
Dlouhy, A. [1 ]
Kucharova, K. [1 ]
Orlova, A. [1 ]
机构
[1] Acad Sci Czech Republic, Inst Phys Mat, Brno 61662, Czech Republic
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 510-11卷
关键词
TiAl-base intermetallics; Creep; Creep rupture; Monkman-Grant relationship; MICROSTRUCTURE; ALLOYS; DEFORMATION;
D O I
10.1016/j.msea.2008.07.077
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The present study investigates creep in three TiAl-base intermetallic alloys, Ti-48A1-2Cr-2Nb-1B, Ti-46Al-7Nb-0.6Cr-0.2Ni-0.1Si and Ti-46Al-2W-0.5Si-0.7B (all at.%), in the range of rupture times up to 25 000 h. Creep behaviour of the individual alloys at 1023 K is assessed and compared and reasons for creep strength variations are discussed. Results suggest that dislocation processes contribute to the creep strain accumulation even at creep rates as low as 7 x 10(-10) s(-1). Finally the applicability of Monkman-Grant-type relationships is critically analyzed. It is shown that these relationships stem from a general functional identity that is valid for any continuous creep curve. The role of the creep curve shape factor S is highlighted. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:350 / 355
页数:6
相关论文
共 23 条
[1]   Mechanistic understanding of creep in gamma-base titanium aluminide alloys [J].
Appel, F .
INTERMETALLICS, 2001, 9 (10-11) :907-914
[2]   Current status of gamma Ti aluminides for aerospace applications [J].
Austin, CM .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 1999, 4 (03) :239-242
[3]   Long term creep of TiAl+W+Si with polycrystalline and columnar grain structures [J].
Beddoes, J ;
Seo, DY ;
Saari, H .
SCRIPTA MATERIALIA, 2005, 52 (08) :745-750
[4]  
Cadek J., 1988, CREEP METALLIC MAT
[5]   Creep and microstructure of near-gamma TiAl alloys [J].
Dlouhy, A ;
Kucharová, K .
INTERMETALLICS, 2004, 12 (7-9) :705-711
[6]   Dislocation slip and deformation twinning interplay during high temperature deformation in γ-TiAl base intermetallics [J].
Dlouhy, A ;
Kucharová, K ;
Brezina, J .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 :820-826
[7]  
DLOUHY A, 2002, MAT ADV POWER ENG 20, P605
[8]  
Dobes F., 1976, Metal Science, V10, P382
[9]  
DOBES F, 1986, METALLIC MAT, V24, P599
[10]  
HOSTINSKY T, 1976, J TEST EVAL, V4, P26, DOI 10.1520/JTE10503J