Thermal and Mechanical Properties of Cast Polyurethane Resin Based on Soybean Oil

The soy polyols were prepared from epoxidation of soybean oil followed by ring opening of oxirane obtained by using methanol as the ring opener. Polyols of hydroxyl (OH) numbers ranging from 128 to 174 mg of KOH/g were obtained by the variation of epoxidation time of soybean oil. A novel cast polyurethane resin has been synthesized by these polyols and 2,4-toluene diisocyanate. Swelling of networks in toluene showed that the sol fraction varies from 1.13 to 72.06%. The thermal and mechanical properties of cast resins were characterized by differential scanning calorimetry and thermogravimetric analysis. The results showed that the glass transition temperature increases with the increase of CH number and that the thermal stability of the resins was slightly decreased with the increasing CH number. The tensile strength at break increases with the increase of OH number. Polyols with OH number of 174 mg of KOH/g gave glassy polymers, whereas those below this value gave rubbers. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112:1122-1127, 2009