Microstructure and magnetic properties of aerosol-deposited Sm-Fe-N thick films

被引：3

作者：

Maki, Tomohito ^{[1
]}

Sugimoto, Satoshi

Kagotani, Toshio

Inomata, Koichiro

Akedo, Jun

机构：

[1] Tohoku Univ, Sendai, Miyagi 980, Japan

[2] Natl Inst Adv Ind Sci & Technol, Tsukuba, Ibaraki, Japan

来源：

ELECTRICAL ENGINEERING IN JAPAN | 2007年 / 158卷 / 01期

关键词：

aerosol deposition method; coercivity; grain size; microstructure; samarium iron nitride; thick film magnet;

D O I：

10.1002/eej.20214

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this study, the relationship among magnetic properties, Aerosol Deposition (AD) conditions, and microstructures in Sm-Fe-N AD films was investigated. The maximum thickness of 145 mu m was obtained under AD conditions of gas flow rate (gfr) = 6 liters/min for 10 min. The density of Sm-Fe-N films was in the range of 5.43 to 6.24 g/cm(3), that is, 71 to 81% of the X-ray density of the Sm2Fe17N3 compound reported (7.67 g/cm(3)). The Sm-Fe-N AD films showed remanence in the range of 0.38 to 0.42 T, that is, 61 to 68% of that of the Sm-Fe-N host powder (0.62 T). The coercivities increased from 1.16 to between 1.74 and 1.79 T after the deposition because the grain size decreased from 1.94 mu m to 0.32 mu m. (C) 2006 Wiley Periodicals, Inc.

引用

页码：8 / 13

页数：6

共 50 条

[41] Microstructure and properties of (Cr:N)-DLC films deposited by a hybrid beam technique
Yang, Wei
Guo, Yongchun
Xu, Dapeng
Li, Jinhua
Wang, Ping
Ke, Peiling
Wang, Aiying
SURFACE & COATINGS TECHNOLOGY, 2015, 261 : 398 - 403
[42] Synthesis, structural and magnetic properties of physical vapor deposited Fe/Si(100) and Fe/Si(111) thin films
Kharmouche, A.
Bensehil, I.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (01) : 631 - 638
[43] Enhanced coercivity of spark plasma sintered Zn-bonded Sm-Fe-N magnets
Prabhu, D.
Sepehri-Amin, H.
Mendis, C. L.
Ohkubo, T.
Hono, K.
Sugimoto, S.
SCRIPTA MATERIALIA, 2012, 67 (02) : 153 - 156
[44] Microstructure and magnetic properties of Ni3Fe solid solution thin films deposited by DC-magnetron sputtering
Yazdi, M. Arab Pour
Fenineche, N.
Aubry, E.
Kaibi, A.
Billard, A.
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 550 : 252 - 257
[45] 3D printing of anisotropic Sm-Fe-N nylon bonded permanent magnets
Gandha, Kinjal
Paranthaman, M. P.
Sales, Brian C.
Wang, Haobo
Dalagan, Adrian
Lamichhane, Tej N.
Parker, David S.
Nlebedim, Ikenna C.
ENGINEERING REPORTS, 2021, 3 (12)
[46] Magnetic properties of Sm-Co thin films grown on MgO(100) deposited from a single alloy target
Verhagen, T. G. A.
Boltje, D. B.
van Ruitenbeek, J. M.
Aarts, J.
JOURNAL OF APPLIED PHYSICS, 2014, 116 (05)
[47] Patterning properties of PZT thick films made by aerosol deposition
Lebedev, M
Akedo, J
FERROELECTRICS, 2002, 270 : 1303 - 1308
[48] Magnetic properties and microstructure studies of Nd-Fe-B thin films
Sun, H
Tomida, T
Hirosawa, S
Maehara, Y
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1996, 164 (1-2) : 18 - 26
[49] Magnetic properties and microstructure of Ni-Fe nitride films by reactive sputtering
Chiba, M
Morio, K
Koizumi, Y
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2002, 242 : 949 - 951
[50] Influence of substrate temperature on structure, microstructure and magnetic properties of sputtered Fe-Ga thin films
Basumatary, Himalay
Chelyane, J. Arout
Rao, D. V. Sridhara
Kamat, S. V.
Ranjan, R.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2015, 384 : 58 - 63

← 1 2 3 4 5 →