Influence of single and double aging treatment on microstructures and mechanical properties of cold rolled Ti-30Nb-5Ta-6Zr alloy

被引：2
作者：
Wang, Y. [1 ]
Dai, S. [1 ]
Chen, F. [1 ]
Yu, X. [1 ]
Zhang, Y. [1 ]
机构：
[1] Southeast Univ, Jiangsu Key Lab Adv Met Mat, Nanjing 211189, Jiangsu, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2014年 / 30卷 / 02期
关键词：
Ti-30Nb-5Ta-6Zr; Aging; Microstructure; Mechanical properties; TITANIUM;
D O I：
10.1179/1743284713Y.0000000336
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new beta type Ti-30Nb-5Ta-6Zr alloy with low Young's modulus, high tensile strength, good plasticity and biocompatibility was designed according to d-electron alloy design method. The influence of single and double aging time on microstructures and mechanical properties of the cold rolled and then soluted alloy was investigated. It was found that the cold rolled Ti-30Nb-5Ta-6Zr alloy is composed of single beta phase after solution treatment at 750 degrees C. With increasing single aging time that varied from 2 to 8 h at 450 and 500 degrees C, the size and quantity of acicular a phase increased gradually, as well as the strength and elastic modulus. As compared with single aging process, the acicular alpha phase became coarsen with increasing double aging time that varied from 0.5 to 2 h, while the quantity of alpha phase decreased. The strength and elastic modulus of the alloy decreased, and the ductility was improved after double aging treatment. Ti-30Nb-5Ta-6Zr alloy obtained excellent integrated mechanical properties through first aging at low temperature for long time and then second aging at high temperature for short time.
引用
收藏
页码：189 / 195
页数：7
相关论文
共 11 条
  • [1] ON THE YOUNG MODULI OF TI-6AL-4V ALLOYS
    FAN, ZY
    [J]. SCRIPTA METALLURGICA ET MATERIALIA, 1993, 29 (11): : 1427 - 1432
  • [2] Hao Y. L., 2002, METALL MATER TRANS A, V334A, P100
  • [3] Hao Y. L., 2002, METALL MATER TRANS A, V33A, P477
  • [4] Design and mechanical properties of new β type titanium alloys for implant materials
    Kuroda, D
    Niinomi, M
    Morinaga, M
    Kato, Y
    Yashiro, T
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 243 (1-2): : 244 - 249
  • [5] Age-hardening behaviour of two metastable beta-titanium alloys
    Ng, H. P.
    Douguet, E.
    Bettles, C. J.
    Muddle, B. C.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (26): : 7017 - 7026
  • [6] Recent research and development in titanium alloys for biomedical applications and healthcare goods
    Niinomi, Mitsuo
    [J]. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2003, 4 (05) : 445 - 454
  • [7] Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations
    Paladugu, Mohanchand
    Kent, Damon
    Wang, Gui
    Yu, Zhentao
    Dargusch, Matthew S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (24-25): : 6601 - 6606
  • [8] TITANIUM - THE IMPLANT MATERIAL OF TODAY
    VANNOORT, R
    [J]. JOURNAL OF MATERIALS SCIENCE, 1987, 22 (11) : 3801 - 3811
  • [9] The use of titanium for medical applications in the USA
    Wang, K
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 213 (1-2): : 134 - 137
  • [10] Microstructures and mechanical properties of Ti-Mo alloys cold-rolled and heat treated
    Zhou, Ying-Long
    Luo, Dong-Mei
    [J]. MATERIALS CHARACTERIZATION, 2011, 62 (10) : 931 - 937
12