The Ventilation Effect on Stator Convective Heat Transfer of an Axial-Flux Permanent-Magnet Machine

被引:47
作者
Chong, Yew Chuan [1 ]
Subiabre, Estanislao J. P. Echenique [1 ]
Mueller, Markus A. [1 ]
Chick, John [1 ]
Staton, David A. [2 ]
McDonald, Alasdair S. [3 ]
机构
[1] Univ Edinburgh, Inst Energy Syst, Edinburgh EH9 3JL, Midlothian, Scotland
[2] Motor Design Ltd, Ellesmere SY12 0EG, Shrops, England
[3] Univ Strathclyde, Dept Elect & Elect Engn, Glasgow G1 1XW, Lanark, Scotland
关键词
Air cored; cooling; direct drive; eddy currents; electric machines; fluid dynamics; loss measurement; permanent-magnet machines; thermal analysis; THERMAL-ANALYSIS; DESIGN; FLOW;
D O I
10.1109/TIE.2013.2284151
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper investigates the effect of the inlet configuration on cooling for an air-cooled axial-flux permanent-magnet (AFPM) machine. Temperature rises in the stator were measured and compared with results predicted using computational fluid dynamic (CFD) methods linked to a detailed machine loss characterization. It is found that an improved inlet design can significantly reduce the stator temperature rises. Comparison between the validated CFD model results and the values obtained from heat transfer correlations addresses the suitability of those correlations proposed specifically for AFPM machines.
引用
收藏
页码:4392 / 4403
页数:12
相关论文
共 31 条
  • [1] Airoldi G., 2010, THESIS DURHAM U DURH
  • [2] [Anonymous], 2011, US GUID STAR CCM VER
  • [4] Evolution and Modern Approaches for Thermal Analysis of Electrical Machines
    Boglietti, Aldo
    Cavagnino, Andrea
    Staton, David
    Shanel, Martin
    Mueller, Markus
    Mejuto, Carlos
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2009, 56 (03) : 871 - 882
  • [5] Boutarfa R, 2005, EXP FLUIDS, V38, P209, DOI [10.1007/s00348-004-0900-5, 10.1007/S00348-004-0900-5]
  • [6] Carter G., 1967, The electromagnetic field in its engineering aspects
  • [7] Childs P.R.N., 2011, ROTATING FLOW, P81, DOI [10.1016/B978-0-12-382098-3.00004-4, DOI 10.1016/B978-0-12-382098-3.00004-4]
  • [8] Chong Y. C., 2012, P 6 IET INT C POW EL, P1
  • [9] Daily J.W., 1960, J BASIC ENG-T ASME, V82, P217, DOI DOI 10.1115/1.3662532
  • [10] Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators
    Di Gerlando, Antonino
    Foglia, Gianmaria
    Iacchetti, Matteo Felice
    Perini, Roberto
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2011, 58 (09) : 3795 - 3805