The nanofabrication of polydimethylsiloxane using a focused ion beam

被引：34
作者：
Guan, Li [1 ]
Peng, Kaiwu [1 ]
Yang, Yanlian [1 ]
Qiu, Xiaohui [1 ]
Wang, Chen [1 ]
机构：
[1] Natl Ctr Nanosci & Technol, Beijing, Peoples R China
来源：
NANOTECHNOLOGY | 2009年 / 20卷 / 14期
基金：
中国国家自然科学基金;
关键词：
SURFACE MODIFICATION; MICROFLUIDIC DEVICE; POLY(DIMETHYLSILOXANE); FABRICATION; LITHOGRAPHY; POLYMERS; ELECTRON;
D O I：
10.1088/0957-4484/20/14/145301
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Nanofabrication on insulating and flexible films of polydimethylsiloxane (PDMS) using a focused ion beam (FIB) has been illustrated in this study. The charge accumulation effect, which is inevitable in polymeric fabrication, was shown to be relieved by simultaneously introducing electron beam flooding in the area exposed to FIB. The topography of the fabricated pattern is subsequently characterized by using an atomic force microscope (AFM), by which the dependence of height/depth of the fabricated arrays on ion beam dose could be obtained. In addition, the swelling effect and milling effect relating to focused ion beam dose could be identified in this study.
引用
收藏
页数：5
相关论文
共 50 条
  • [41] Selective filling of photonic crystal fibers using focused ion beam milled microchannels
    Wang, Fei
    Yuan, Wu
    Hansen, Ole
    Bang, Ole
    OPTICS EXPRESS, 2011, 19 (18): : 17585 - 17590
  • [42] Direct core structuring of microstructured optical fibers using focused ion beam milling
    Warren-Smith, Stephen C.
    Andre, Ricardo M.
    Perrella, Christopher
    Dellith, Jan
    Bartelt, Hartmut
    OPTICS EXPRESS, 2016, 24 (01): : 378 - 387
  • [43] Comparison of Plasmonic Arrays of Holes Recorded by Interference Lithography and Focused Ion Beam
    Menezes, J. W.
    Barea, L. A. M.
    Chillcce, E. F.
    Frateschi, N.
    Cescato, L.
    IEEE PHOTONICS JOURNAL, 2012, 4 (02): : 544 - 551
  • [44] Creation of Controlled Defects Inside Colloidal Crystal Arrays with a Focused Ion Beam
    Magni, Simone
    Milani, Marziale
    NANOSCALE RESEARCH LETTERS, 2010, 5 (07): : 1182 - 1189
  • [45] Prediction of nanopattern topography using two-dimensional focused ion beam milling with beam irradiation intervals
    Han, Jin
    Lee, Hiwon
    Min, Byung-Kwon
    Lee, Sang Jo
    MICROELECTRONIC ENGINEERING, 2010, 87 (01) : 1 - 9
  • [46] A review of defect engineering, ion implantation, and nanofabrication using the helium ion microscope
    Allen, Frances I.
    BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 2021, 12 : 633 - 664
  • [47] Unmasking the Resolution-Throughput Tradespace of Focused-Ion-Beam Machining
    Madison, Andrew C.
    Villarrubia, John S.
    Liao, Kuo-Tang
    Copeland, Craig R.
    Schumacher, Joshua
    Siebein, Kerry
    Ilic, B. Robert
    Liddle, J. Alexander
    Stavis, Samuel M.
    ADVANCED FUNCTIONAL MATERIALS, 2022, 32 (38)
  • [48] Solvent-free microfabrication of thin film device using the focused ion beam
    Jeon, Hoseong
    Song, Sehwan
    Park, Sungkyun
    Kim, Jun Sung
    Ok, Jong Mok
    CURRENT APPLIED PHYSICS, 2024, 63 : 1 - 6
  • [49] Milling a silicon nitride membrane by focused ion beam
    Peltonen, Antti
    Nguyen, Hung Q.
    Muhonen, Juha T.
    Pekola, Jukka P.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2016, 34 (06):
  • [50] Low energy focused ion beam system design
    Rauscher, Michael
    Plies, Erich
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2006, 24 (04): : 1055 - 1066
12345