Solid-state reduction of chromium oxide by methane-containing gas

被引:55
作者
Anacleto, N [1 ]
Ostrovski, O [1 ]
机构
[1] Univ New S Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia
来源
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | 2004年 / 35卷 / 04期
关键词
D O I
10.1007/s11663-004-0001-0
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Reduction of chromium oxide, Cr2O3, was investigated in a fixed bed laboratory reactor in the temperature range 900 degreesC to 1200 degreesC using CH4-H-2-Ar gas mixture. The extent and rate of reduction as functions of gas composition and temperature were determined by on-line off-gas analysis using a mass spectrometer. Samples at different stages of reduction were examined by scanning electron microscope (SEM) and X-ray diffraction (XRD) analysis. The chromium oxide was reduced to chromium carbide Cr3C2 with a degree of reduction close to 100 pct. The rate of reduction increased with temperature and methane content in the reducing gas. Carbon monoxide, added to the reducing gas, strongly retarded the rate of Cr2O3 reduction. The hydrogen content had a slight effect on the reduction rate. High extent and rate of reduction by methane-containing gas in comparison with carbothermal reduction were attributed to high carbon activity in the reducing gas-15 to 50 (relative to graphite).
引用
收藏
页码:609 / 615
页数:7
相关论文
共 13 条
  • [1] STUDIES ON THE KINETICS OF THE CARBOTHERMIC REDUCTION OF CHROMIUM-OXIDE USING THE EVOLVED GAS-ANALYSIS TECHNIQUE
    ANTONY, MP
    VIDHYA, R
    MATHEWS, CK
    RAJU, UVV
    [J]. THERMOCHIMICA ACTA, 1995, 262 : 145 - 155
  • [2] RATE OF REDUCTION OF CR2O3 BY CARBON AND CARBON DISSOLVED IN LIQUID-IRON ALLOYS
    FRUEHAN, RJ
    [J]. METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1977, 8 (03): : 429 - 433
  • [3] GRABKE HJ, 1970, METALL TRANS, V1, P2972
  • [4] Katayama H. G., 1976, Journal of the Japan Institute of Metals, V40, P993
  • [5] Knacke O., 1991, Thermochemical Properties of Inorganic Substances, V2nd
  • [6] LEKATOU A, 1995, IRONMAK STEELMAK, V22, P378
  • [7] PEI WG, 1993, SCAND J METALL, V22, P38
  • [8] QAYYUM MA, 1976, CAN METALL QUART, V15, P193, DOI 10.1179/000844376795050723
  • [9] Rankin W. J., 1979, T I MIN METALL, V88, P107
  • [10] READ PJ, 1974, CAN METALL QUART, V13, P587