COMPARISONS OF THE THERMOMECHANICAL FATIGUE BEHAVIOR OF C/SIC AND SIC/SIC CERAMIC-MATRIX COMPOSITES SUBJECTED TO DIFFERENT PHASE ANGLE

被引：0

作者：

Li, L. B. ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Coll Civil Aviat, Nanjing, Jiangsu, Peoples R China

来源：

JOURNAL OF MECHANICS | 2019年 / 35卷 / 02期

关键词：

Ceramic-matrix composites (CMCs); Thermomechanical fatigue; Damage accumulation; Phase angle; LIFE PREDICTION; DEGREES-C; TEMPERATURE; ROOM; STRESS; LOAD; AIR;

D O I：

10.1017/jmech.2017.111

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In this paper, the comparisons of thermomechanical fatigue behavior of C/SiC and SiC/SiC fiberreinforced ceramic-matrix composites (CMCs) subjected to different phase angles of theta = 0, pi/3, pi/2 and pi have been investigated. The relationships between the fatigue damage mechanisms, phase angle, fatigue hysteresis dissipated energy, fatigue hysteresis modulus and fatigue peak strain, fiber/matrix interface debonding and sliding have been established. The differences between C/SiC and SiC/SiC composites under thermomechanical fatigue loading with different phase angles have been analyzed. The damage accumulation of 2.5D C/SiC and 2D SiC/SiC composites under thermomechanical fatigue loading have been predicted. With increasing of the phase angle, the fatigue hysteresis dissipated energy, fatigue peak strain and interface debonded length decrease for the SiC/SiC composite; however, for the C/SiC composite, the fatigue hysteresis dissipated energy, fatigue peak strain and the interface debonded length increase at the same cycle number.

引用

页码：209 / 223

页数：15

共 22 条

[1]

Allen D. G., 1997, CERAM ENG SCI P, V18, P763, DOI DOI 10.1002/9780470294437.CH83

[2]

[Anonymous], 2011, THESIS U HONG KONG H

[3] THERMOMECHANICAL FATIGUE BEHAVIOR OF A SILICON-CARBIDE FIBER-REINFORCED CALCIUM ALUMINOSILICATE COMPOSITE [J].

BUTKUS, LM ;

HOLMES, JW ;

NICHOLAS, T .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (11) :2817-2825

[4] Mechanical behaviour and lifetime modelling of self-healing ceramic-matrix composites subjected to thermomechanical loading in air [J].

Cluzel, C. ;

Baranger, E. ;

Ladeveze, P. ;

Mouret, A. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (08) :976-984

[5] Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state [J].

Dassios, Konstantinos G. ;

Aggelis, Dimitris G. ;

Kordatos, Evangelos Z. ;

Matikas, Theodore E. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 44 :105-113

[6] Design and life prediction issues for high-temperature engineering ceramics and their composites [J].

Evans, AG .

ACTA MATERIALIA, 1997, 45 (01) :23-40

[7] Identification of a Critical Time with Acoustic Emission Monitoring during Static Fatigue Tests on Ceramic Matrix Composites: Towards Lifetime Prediction [J].

Godin, Nathalie ;

Reynaud, Pascal ;

R'Mili, Mohamed ;

Fantozzi, Gilbert .

APPLIED SCIENCES-BASEL, 2016, 6 (02)

[8]

Kim T.T., 2009, 17 INT C COMP MAT ED

[9] Modeling strength degradation of fiber-reinforced ceramic-matrix composites under cyclic loading at room and elevated temperatures [J].

Li Longbiao .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 695 :221-229

[10] Comparisons of interface shear stress degradation rate between C/SiC and SiC/SiC ceramic-matrix composites under cyclic fatigue loading at room and elevated temperatures [J].

Li, Longbiao .

COMPOSITE INTERFACES, 2016, 24 (02) :171-202

← 1 2 3 →