The analytical characterization of castor seed cake pyrolysis bio-oils by using comprehensive GC coupled to time of flight mass spectrometry

被引:45
作者
Silva, Raquel V. S. [1 ]
Casilli, Alessandro [2 ]
Sampaio, Alexandre L. [1 ]
Avila, Barbara M. F. [2 ]
Veloso, Marcia C. C. [1 ]
Azevedo, Debora A. [2 ]
Romeiro, Gilberto A. [1 ]
机构
[1] Univ Fed Fluminense, Inst Quim, BR-24210150 Niteroi, RJ, Brazil
[2] Univ Fed Rio de Janeiro, Inst Quimica, BR-21941909 Rio De Janeiro, RJ, Brazil
关键词
Castor seed cakes; Slow pyrolysis; Bio-oil; GCxGC-TOFMS; LOW-TEMPERATURE CONVERSION; 2-DIMENSIONAL GAS-CHROMATOGRAPHY; ENVIRONMENTAL-IMPACT; PY-GC/MS; CELLULOSE; BIOMASS; PRODUCTS; LIGNIN; SLOW; LTC;
D O I
10.1016/j.jaap.2014.01.013
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
The castor oil is one of the world's most useful and economically important natural plant oils. The castor oil extraction from the pressing of castor seeds is responsible for the daily generation of half a ton of a solid residue, called castor seed cake, for every ton of seed used in this process. The aim of this work was to use slow pyrolysis to obtain, from castor seed cakes, pyrolysis oil and determine its chemical composition. The bio-oil composition was investigated using comprehensive two-dimensional gas chromatography (GCxGC) coupled to time of flight mass spectrometry (TOFMS), and 408 compounds were tentatively identified. Among the compounds identified were: hydrocarbon (13.2%), nitrogen (9.5%), oxygen (8.4%) and sulphur (0.2%) compounds. The calorific value of the pyrolysis oils (37.5 MJ kg(-1)) was similar to petroleum fuels used commercially (43-46 MJ kg(-1)) and greater than typical wood-derived crude bio-oils (17 MJ kg(-1)). Thus, this oil may be potentially useful for production of chemicals and energy, after upgrading, proving to be a great choice destination of this waste. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:152 / 159
页数:8
相关论文
共 44 条
[1]   Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 1: Experimental Pyrolysis Data [J].
Alston, Sue M. ;
Clark, Allan D. ;
Arnold, J. Cris ;
Stein, Bridget K. .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2011, 45 (21) :9380-9385
[2]   Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 2: Life Cycle Assessment [J].
Alston, Sue M. ;
Arnold, J. Cris .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2011, 45 (21) :9386-9392
[3]  
[Anonymous], 2012, D754412 ASTM
[4]   Chlorinated and Nonchlorinated Compounds from the Pyrolysis and Combustion of Polychloroprene [J].
Aracil, Ignacio ;
Font, Rafael ;
Conesa, Juan A. .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2010, 44 (11) :4169-4175
[5]   Current technologies for analysis of biomass thermochemical processing: A review [J].
Bahng, Mi-Kyung ;
Mukarakate, Calvin ;
Robichaud, David J. ;
Nimlos, Mark R. .
ANALYTICA CHIMICA ACTA, 2009, 651 (02) :117-138
[6]   Pyrolysis of poly-glycine and poly-L-alanine: analysis of less-volatile products by gas chromatography/Fourier transform infrared spectroscopy/mass spectrometry [J].
Basiuk, VA ;
Douda, J .
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2000, 55 (02) :235-246
[7]  
Bayer E., 1987, LOW TEMPERATURE CONV
[8]   Comparison for the compositions of fast and slow pyrolysis oils by NMR characterization [J].
Ben, Haoxi ;
Ragauskas, Arthur J. .
BIORESOURCE TECHNOLOGY, 2013, 147 :577-584
[9]   Review of fast pyrolysis of biomass and product upgrading [J].
Bridgwater, A. V. .
BIOMASS & BIOENERGY, 2012, 38 :68-94
[10]   Calculation of higher heating values of biomass fuels [J].
Demirbas, A .
FUEL, 1997, 76 (05) :431-434