Extremely fine and uniform microstructure of magnesium AZ91D alloy sheets produced by melt conditioned twin roll casting

Magnesium AZ91D alloy strips consisting of equiaxed grains with a mean size less than 100 mm were fabricated successfully by using the melt conditioned twin roll casting (MC-TRC) process. A melt conditioning by advanced shear technology (MCAST) process for conditioning liquid metals at temperatures either above or below the alloy liquidus using a high shear twin screw mechanism was combined with the twin roll casting (TRC) process to form an innovative technology, namely, the MC-TRC process for casting Al alloy and Mg alloy strips. During the MC- TRC process, liquid melt with a specified temperature is continuously fed into the MCAST machine. By intensive shearing under the high shear rate and high intensity of turbulence, the liquid is transformed into conditioned melt with uniform temperature and composition throughout the whole volume. The conditioned melt is then fed continuously into the twin roll caster for strip production. The experimental results show that the AZ91D MC- TRC strips with different thicknesses have a fine and uniform microstructure. It consists of equiaxed grains with a mean size of 60-70 mm, and also displays extremely uniform grain size and composition throughout the entire cross-section. Investigation also shows that the MC- TRC processes are extremely effective to reduce the formation of defects, particularly the formation of the central line segregations.