Friction surfacing of mild steel by copper: A feasibility study

被引：14

作者：

Jujare, Tarunkumar ^{[1
]}

Kumar, Arun ^{[2
]}

Kailas, Satish V. ^{[2
]}

Bhat, Udaya K. ^{[1
]}

机构：

[1] NITK, Dept Met & Mat Engn, Srinivasanagar PO, Mangalore 575025, Karnataka, India

[2] IISc, Dept Mech Engn, Bangalore 560012, Karnataka, India

来源：

INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014) | 2014年 / 5卷

关键词：

Friction surfacing; copper; adherence; viscoplastic state; TOOL STEEL; COATINGS; CU;

D O I：

10.1016/j.mspro.2014.07.445

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work reports on the feasibility of deposition of copper on the mild steel using friction surfacing method. Commercial mild steel was chosen as the substrate and commercial pure copper as the consumable rod. Friction surfacing was attempted by varying the parameters, namely, rotational speed as 1250, 1500 and 1750 rpm and scan speed as 20, 30 and 40 mm/minute. A constant, 2 kN load was used as axial load. Good deposition was obtained under certain combination of process parameters. Deposition was characterized using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy and x-ray diftractometry. Formation of copper deposit on the mild steel substrate is discussed. (C) 2014 Elsevier Ltd.

引用

页码：1300 / 1307

页数：8

共 50 条

[41] Friction Surfacing Conditions for Functionally Organized Steel-Aluminum Laminated Compositions
Esipova, A. D.
Slepov, D. V.
Mikheev, R. S.
Kalashnikov, I. E.
Kolmakov, A. G.
RUSSIAN METALLURGY, 2024, 2024 (02): : 348 - 353
[42] A Characterization Study on Coating Geometry During Deposition of AISI304 Stainless Steel Over C40 High Carbon Steel Using Friction Surfacing Process
Sahoo, Dillip Kumar
Jaswanth, A.
Varma, D. Abhinay
3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020), 2020, 2311
[43] Microstructure and Corrosion Study on Friction Surfaced Aluminum Alloy Coatings over Mild Steel
Sivalingam, Vinodh
Thirumalaisamy, Ramakrishnan
PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING, 2024, 68 (03) : 382 - 397
[44] Quantification of the interfacial roughness when coating stainless steel onto aluminium by friction surfacing
Stegmueller, M. J. R.
Grant, R. J.
Schindele, P.
SURFACE & COATINGS TECHNOLOGY, 2019, 375 : 22 - 33
[45] A COMPARATIVE STUDY ON THE SINGLE AND DOUBLE-LAYERED DEPOSITION OF ALUMINUM 6063 OVER EN8 MEDIUM CARBON STEEL USING FRICTION SURFACING
Sahoo, Dillip kumar
Mohanty, Bhulok sundar
Bhaskar, G. B.
SURFACE REVIEW AND LETTERS, 2022, 29 (10)
[46] Process study for friction stir lap welding of copper/steel dissimilar metals
Zhou L.
Jiang Z.
Lei S.
Yu M.
Zhao H.
Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (04): : 22 - 27
[47] Effect of copper and mild steel on the stability of palm biodiesel properties: A comparative study
Fazal, M. A.
Jakeria, M. R.
Haseeb, A. S. M. A.
INDUSTRIAL CROPS AND PRODUCTS, 2014, 58 : 8 - 14
[48] Microstructure and mechanical properties of Al/steel dissimilar welds fabricated by friction surfacing assisted friction stir lap welding
Zhou, Li
Yu, Mingrun
Liu, Baiyang
Zhang, Zili
Liu, Shuwei
Song, Xiaoguo
Zhao, Hongyun
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (01): : 212 - 221
[49] Influence of rotation speed on microstructure formation during friction surfacing of AISI 316L over mild steel using a conventional CNC machining center
Diego Fonseca Silva
Pedro Brito
The International Journal of Advanced Manufacturing Technology, 2023, 126 : 4915 - 4924
[50] Feasibility of multilayer solid-state deposition via lateral friction surfacing for metal additive manufacturing
Seidi, Ebrahim
Miller, Scott F.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 1708 - 1725

← 1 2 3 4 5 →