STRESSES AND CRACKING DURING DIRECT CHILL CASTING OF AZ31 ALLOY BILLET

被引：0
|
作者：
Grandfield, J. F. [1 ]
Nguyen, V. [2 ]
Bainbridge, I. F. [3 ]
机构：
[1] Grandfield Technol Pty Ltd, Brunswick, Vic, Australia
[2] CSIRO Mat Sci & Engn, Clayton, Vic, Australia
[3] Univ Queensland, Brisbane, Qld 4072, Australia
来源：
MAGNESIUM TECHNOLOGY 2009 | 2009年
关键词：
direct chill casting; AZ31; magnesium; hot tearing; HOT TEARING FORMATION; MATHEMATICAL-MODEL;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The Alsim FEM model which has been applied to aluminum DC casting was applied to the problem of crack formation during vertical direct chill casting of magnesium alloys. The model is a fully coupled thermal stress model. Predictions were compared to crack incidence observed for a variety of cast start speed conditions used on AZ31 alloy, 208 mm diameter billet casting. Crack incidence was related to the pool depth development and other criteria such as the liquid pressure in the mush. The model can be used to develop improved starting head designs and cast start practices.
引用
收藏
页码：129 / +
页数：2
相关论文
共 50 条
  • [21] Influence of Grain Refinement with SiC Particles and Casting Speed on the Grain Size of HP AZ31 during Vertical Direct Chill Casting
    Schiffl, A.
    Easton, M.
    BHM Berg- und Huttenmannische Monatshefte, 2009, 154 (05): : 189 - 193
  • [22] A mathematical model of heat transfer and fluid flow in the direct chill casting of AZ31 magnesium billets
    Lu, EH
    Maijer, DM
    Hao, H
    Sediako, D
    MAGNESIUM TECHNOLOGY 2005, 2005, : 235 - 240
  • [23] Superplastic behaviors of casting AZ31 magnesium alloy
    Li, H. B.
    Zhao, J.
    Luo, J. T.
    Hang, M.
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2007, 551-552 : 237 - +
  • [24] Hot Cracking in AZ31 and AZ61 Magnesium Alloy
    Huang, C. J.
    Cheng, C. M.
    Chou, C. P.
    Chen, F. H.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2011, 27 (07) : 633 - 640
  • [25] Hot Cracking in AZ31 and AZ61 Magnesium Alloy
    C.J. Huang1)
    Journal of Materials Science & Technology, 2011, 27 (07) : 633 - 640
  • [26] Microstructure control during twin roll casting of an AZ31 magnesium alloy
    Huang, Y.
    Bayandorian, I.
    Fan, Z.
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN SOLIDIFICATION PROCESSES, 2012, 27
  • [27] COLD CRACKING DURING DIRECT-CHILL CASTING
    Eskin, D. G.
    Lalpoor, M.
    Katgerman, L.
    LIGHT METALS 2011, 2011, : 669 - 674
  • [28] Direct chill billet casting of aluminium alloys
    Jarrett, M
    Neilson, B
    Manson-Whitton, E
    SOLIDIFICATION AND CASTING, 2003, : 3 - 25
  • [29] On numerical modeling of low-head direct chill ingot caster for magnesium alloy AZ31
    Hasan, Mainul
    Begum, Latifa
    JOURNAL OF MAGNESIUM AND ALLOYS, 2014, 2 (04) : 275 - 286
  • [30] Hydrogen behaviour during stress-corrosion cracking of an AZ31 magnesium alloy
    Kuramoto, S.
    Araki, I.
    Kanno, M.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2001, 51 (08): : 397 - 402
12345