Application of MCDM Method for the Selection of Optimum Process Parameters in Turning Process

被引：14

作者：

Singaravel, B. ^{[1
]}

Shankar, D. Prabhu ^{[1
]}

Prasanna, Lakshmi ^{[1
]}

机构：

[1] Vignan Inst Tehnol & Sci, Mech Engn Dept, Hyderabad 508284, Telangana, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 05期

关键词：

Turning; AISI; 4340; steel; process parameters and ARAS; MACHINING PARAMETERS; CUTTING CONDITIONS; SURFACE INTEGRITY; INCONEL; 718; OPTIMIZATION;

D O I：

10.1016/j.matpr.2018.02.341

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Turning process is one of the fundamental machining operations and its parameters optimization leads to better machining performance. This study applies Additive Ratio Assessment (ARAS) method to determine the optimum process parameters and suitable coated tool in turning operation of AISI 4340 steel. The process parameters considered are cutting speed, feed rate, depth of cut and coated tools. The objective is to minimize surface roughness, micro hardness and maximize Material Removal Rate (MRR) simultaneously. The result revealed that this proposed method is appropriate for solving multi criteria optimization of process parameters. (C) 2017 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Materials Manufacturing and Modelling (ICMMM - 2017).

引用

页码：13464 / 13471

页数：8

共 50 条

[1] Evaluation of Optimum Turning Process of Process Parameters Using DOE and PCA Taguchi Method
Madhavi, S. Krishna
Sreeramulu, D.
Venkatesh, M.
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 1937 - 1946
[2] Experimental investigation of process parameters for turning aluminum using ANOVA
Bindhushree, B. S.
Arunadevi, M.
Prakash, C. P. S.
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 5060 - 5066
[3] Application of the Taguchi method for surface roughness predictions in the turning process
Ozturk, Sabri
MATERIALS TESTING, 2016, 58 (09) : 782 - 787
[4] Effect of machining parameters on turning process of Inconel 718
Pinheiro, Cleverson
Kondo, Marcel Yuzo
Amaral, Simone Simoes
Callisaya, Emanuele Schneider
Candido De Souza, Jose Vitor
De Sampaio Alves, Manoel Cleber
Ribeiro, Marcos Valerio
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (12) : 1421 - 1437
[5] Application of Desirability Function Analysis and Utility Concept for Selection of Optimum Cutting Parameters in Turning Operation
Singaravel, B.
Selvaraj, T.
JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2016, 15 (01) : 1 - 11
[6] Evaluation of optimum process parameters based on specific cutting energy in turning for sustainability
Revuru, Rukmini Srikant
Sanjay, Kethavath Tejasvi
Srinu, Banoth
Krishna, Pasam Vamsi
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 136 (10): : 4569 - 4579
[7] Optimizing Machining Parameters during Turning Process
Abdulkareem, Suleiman
Rumah, Usman Jibrin
Adaokoma, Apasi
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2011, 3 (01): : 23 - 27
[8] COMPUTER-AIDED SELECTION OF OPTIMUM MACHINING PARAMETERS IN MULTIPASS TURNING
MESQUITA, R
KRASTEVA, E
DOYTCHINOV, S
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1995, 10 (01): : 19 - 26
[9] Selection of optimum performance conditions in the laser-assisted turning of AISI 4340 hardened steel through the coupling of entropy/MCDM analysis
Khatir, Farzad Ahmadi
Modanloo, Vahid
Abedini, Vahid
Akar, Samet
Ghadikolaee, Hossein Talebi
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024,
[10] Complex Proportional Assessment (COPRAS) based Multiple-Criteria Decision Making (MCDM) paradigm for hard turning process parameters
Patil, Sairaj B.
Patole, Tushar A.
Jadhav, Rasika S.
Suryawanshi, Shruti S.
Raykar, Sunil J.
MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 835 - 840

← 1 2 3 4 5 →