The effect of austenitic interlayer on microstructure and mechanical behaviors in keyhole plasma transfer arc welding of ferritic stainless steel couple

In this study, AISI 430 ferritic stainless steel couple of 10 mm thickness was welded by keyhole plasma transferred arc welding (KPTAW) process with or without filler wire addition using AISI 316L austenitic stainless steel interlayer of 2 mm thickness. Welded joints were manufactured with constant traverse speeds (0.01 m/min) under two different welding currents (110 and 130 A) at two different plasma gas flow rates (1.1 and 1.2 l/min), nozzle diameter (2.4 mm), and a shielding gas flow rate (25 l/min). In order to determine the microstructural changes that occurred, the interface regions of the welded samples were examined by scanning electron microscopy (SEM), optic microscopy, X-ray diffraction, and energy dispersive spectrometry after KPTAW. Microhardness and V-notch impact tests were conducted to determine the mechanical properties of the welded samples. In addition, fracture surface was examined by SEM after impact test.