Vacuum compatibility of silver and titanium parts made using three-dimensional printing

被引：13

作者：

Gans, Ashley R. ^{[1
]}

Jobbins, Matthew M. ^{[1
]}

Lee, David Y. ^{[1
]}

Kandel, S. Alex ^{[1
]}

机构：

[1] Univ Notre Dame, Dept Chem & Biochem, Notre Dame, IN 46556 USA

来源：

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A | 2014年 / 32卷 / 02期

基金：

美国国家科学基金会;

关键词：

D O I：

10.1116/1.4846195

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Three-dimensional (3D) printing has many advantages over conventional machining techniques, and it is particularly well suited for rapid production of prototypes. This Shop Note reports pump-down curves for a small ultrahigh-vacuum chamber loaded with 3D-printed silver and titanium parts. Neither material showed any measurable adverse affect on the ultimate base pressure achieved, which was approximately 5 x 10(-10) Torr. 3D-printed metals can therefore be considered suitable for select ultrahigh-vacuum applications. (C) 2014 American Vacuum Society.

引用

页数：2

共 8 条

[1] Economics of additive manufacturing for end-usable metal parts
Atzeni, Eleonora
Salmi, Alessandro
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 62 (9-12) : 1147 - 1155
[2] A COMPARISON OF THE OUTGASSING CHARACTERISTICS OF SEVERAL SOLAR ABSORBING COATINGS
ERIKSON, ED
BERGER, DD
FRAZIER, BA
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1985, 3 (03): : 1711 - 1714
[3] VACUUM OUTGASSING OF VARIOUS MATERIALS
ERIKSON, ED
BEAT, TG
BERGER, DD
FRAZIER, BA
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1984, 2 (02): : 206 - 210
[4] Compact, single-tube scanning tunneling microscope with thermoelectric cooling
Jobbins, Matthew M.
Agostino, Christopher J.
Michel, Jolai D.
Gans, Ashley R.
Kandel, S. Alex
[J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 2013, 84 (10)
[5] Rapid manufacturing of metallic objects
Karunakaran, K. P.
Bernard, Alain
Suryakumar, S.
Dembinski, Lucas
Taillandier, Georges
[J]. RAPID PROTOTYPING JOURNAL, 2012, 18 (04) : 264 - 280
[6] Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J. -P.
Levy, G.
Klocke, F.
Childs, T. H. C.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (02) : 730 - 759
[7] 3D printing in X-ray and gamma-ray imaging: A novel method for fabricating high-density imaging apertures
Miller, Brian W.
Moore, Jared W.
Barrett, Harrison H.
Frye, Teresa
Adler, Steven
Sery, Joe
Furenlid, Lars R.
[J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2011, 659 (01) : 262 - 268
[8] Moore J.H., 2003, BUILDING SCI APPARAT

← 1 →