Driving and Application of Blue Light Organic Light Emitting Devices

被引:0
作者
Liu, Hongbo [1 ]
Liu, Minghui [1 ]
Cong, Lin [2 ]
Wang, Lizhong [1 ]
Huang, Tao [1 ]
Song, Mingxing [1 ]
机构
[1] Jilin Normal Univ, Coll Informat & Technol, Jilin 136000, Jilin, Peoples R China
[2] Beijing BOE Display Technol Co Ltd BOEDT, Beijing 100176, Peoples R China
关键词
Blu-Ray Device; Low Voltage Drive; Packaging; Boost Circuit; THIN-FILM ENCAPSULATIONS; MOLECULAR HOST MATERIALS; IR(III) COMPLEXES; MOISTURE BARRIER; FABRICATION; PERFORMANCE; ENERGY; EFFICIENCY; EMISSION; EMITTERS;
D O I
10.1166/nnl.2019.2932
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The DPVBi (4,4'-bis(2,2-diphenylvinyl-1,1'-biphenyl) is a blue-light organic fluorescence doped material, which can be used as a hole barrier layer or a luminescent layer for fabricating organic light-emitting devices. A blue light device with stable color stability and high efficiency was prepared by co-doping blue light dye DPVBi and red light dye DCJTB as light-emitting layer. In order to prevent the infiltration of O-2 and moisture inside the device from affecting the luminescence lifetime of the device, the device was encapsulated by atomic layer deposition. Since the driving voltage of the organic light-emitting device is generally above 5 V and the power consumption is low, in order to facilitate driving with a low voltage, a boost driving circuit based on the XL6009 chip was designed. The driver of the fabricated blue-light device was tested. The results showed that circuit had low-voltage drive characteristics and could be widely used in small toys, lighting, and portable devices. Through the test to achieve the desired goal, the requirements of low voltage and low energy consumption were realized, and the life of the light-emitting device can be tested, which has certain practicability and reference value.
引用
收藏
页码:711 / 717
页数:7
相关论文
共 74 条
[1]   Preliminary thermal annealing tests of OLED glass samples [J].
Arazna, Aneta ;
Koziol, Grazyna ;
Futera, Konrad ;
Janeczek, Kamil ;
Lipiec, Krzysztof .
MICROELECTRONICS INTERNATIONAL, 2014, 31 (03) :212-216
[2]   Cost, energy and emissions assessment of organic polymer light-emitting device architectures [J].
Carter, Catrice M. ;
Cho, Justin ;
Glanzer, Aaron ;
Kamcev, Nikola ;
O'Carroll, Deirdre M. .
JOURNAL OF CLEANER PRODUCTION, 2016, 137 :1418-1431
[3]  
Chen YL, 2011, J INFRARED MILLIM W, V30, P271
[4]   Improving the Extraction Efficiency of Planar GaN-Based Blue Light-Emitting Diodes via Optimizing Indium Tin Oxide Nanodisc Arrays [J].
Chen, Zhanxu ;
Liu, Wenjie ;
Wan, Wei ;
Chen, Gengyan ;
Zhang, Baijun ;
Jin, Chongjun .
JOURNAL OF DISPLAY TECHNOLOGY, 2016, 12 (12) :1588-1593
[5]  
[陈志明 CHEN Zhiming], 2006, [光电子·激光, Journal of Optoelectronics·Laser], V17, P1349
[6]   Donor Interlocked Molecular Design for Fluorescence-like Narrow Emission in Deep Blue Thermally Activated Delayed Fluorescent Emitters [J].
Cho, Yong Joo ;
Jeon, Sang Kyu ;
Lee, Sang-Shin ;
Yu, Eunsun ;
Lee, Jun Yeob .
CHEMISTRY OF MATERIALS, 2016, 28 (15) :5400-5405
[7]   Separation Characteristics of an LMPA-Polymer Mixture for the Encapsulation of Organic Light-Emitting Diode [J].
Choi, Hyun-Su ;
Kwon, Hye-Kyung ;
Kim, Keun-Soo ;
Park, Joon-Sik ;
Moon, Choel-Hee .
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2014, 4 (07) :1131-1135
[8]   The use of carbon quantum dots as fluorescent materials in white LEDs [J].
Cui Bo ;
Feng Xiao-ting ;
Zhang Feng ;
Wang Ya-ling ;
Liu Xu-guang ;
Yang Yong-zhen ;
Jia Hu-sheng .
NEW CARBON MATERIALS, 2017, 32 (05) :385-401
[9]   Review of coupling methods for non-matching meshes [J].
de Boer, A. ;
van Zuijlen, A. H. ;
Bijl, H. .
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2007, 196 (08) :1515-1525
[10]   Simulation and fabrication of N-polar GaN-based blue-green light-emitting diodes with p-type AlGaN electron blocking layer [J].
Deng, Gaoqiang ;
Zhang, Yuantao ;
Yu, Ye ;
Yan, Long ;
Li, Pengchong ;
Han, Xu ;
Chen, Liang ;
Zhao, Degang ;
Du, Guotong .
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, 29 (11) :9321-9325