Foamed-metal-reinforced composites: Tribological behavior of foamed copper filled with epoxy-matrix polymer

被引：22

作者：

Ji, Keju ^{[1
]}

Xu, Yinsong ^{[1
]}

Zhang, Jun ^{[1
]}

Chen, Jia ^{[1
]}

Dai, Zhendong ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Inst Bioinspired Struct & Surface Engn, Nanjing 210016, Jiangsu, Peoples R China

来源：

MATERIALS & DESIGN | 2014年 / 61卷

基金：

中国国家自然科学基金;

关键词：

SLIDING WEAR BEHAVIOR; ALUMINUM FOAMS; FRICTION;

D O I：

10.1016/j.matdes.2014.04.072

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To improve the thermal performance and wear resistance of epoxy-matrix polymers, foamed copper materials filled with a curable epoxy matrix have been developed for tribological studies. Graphite flakes were incorporated as friction additive in the epoxy matrix. The tribological properties of foamed-copper-reinforced composites were investigated using a UMT-2 friction and wear tester. The temperature of the frictional area was measured using an infra-red thermal camera, and the effect of metallic skeletons on temperature was calculated by the finite element analysis (FEA). The results show the foamed-copper-reinforced composites are effective in transmitting heat and sharing load along the interconnected metallic skeletons, and therefore possess better thermal conductivity and wear resistance. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：109 / 116

页数：8

共 27 条

[1] Dry sliding wear behavior of SiC/Al2O3 filled jute/epoxy composites [J].

Ahmed, K. Sabeel ;

Khalid, Syed Sha ;

Mallinatha, V. ;

Kumar, S. J. Amith .

MATERIALS & DESIGN, 2012, 36 :306-315

[2] Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams [J].

Bai, Mo ;

Chung, J. N. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2011, 50 (06) :869-880

[3] Hierarchically constructed metal foam/polymer composite for high thermal conductivity [J].

Burris, David L. ;

Sawyer, W. Gregory .

WEAR, 2008, 264 (3-4) :372-378

[4] Tribological properties of high temperature resistant polymer composites with fine particles [J].

Chang, Li ;

Zhang, Zhong ;

Ye, Lin ;

Friedrich, Klaus .

TRIBOLOGY INTERNATIONAL, 2007, 40 (07) :1170-1178

[5]

Chen ZP, 2011, NAT MATER, V10, P424, DOI [10.1038/NMAT3001, 10.1038/nmat3001]

[6] The tribological behaviour of different engineering plastics under dry friction conditions [J].

Feyzullahoglu, Erol ;

Saffak, Zehra .

MATERIALS & DESIGN, 2008, 29 (01) :205-211

[7] Spatial normalization of the high-frequency ultrasound energy loss in open-cell foams [J].

Gomez Alvarez-Arenas, T. E. ;

Gonzalez Gomez, I. .

APPLIED PHYSICS LETTERS, 2007, 90 (20)

[8] Open-cell aluminum foams filled with phase change materials as compact heat sinks [J].

Hong, Sung-Tae ;

Herling, Darrell R. .

SCRIPTA MATERIALIA, 2006, 55 (10) :887-890

[9] Different Foamed Metal-Reinforced Composites: Tribological Behavior and Temperature Field Simulation [J].

Ji, Keju ;

Xia, Yanqiu ;

Dai, Zhendong .

TRIBOLOGY TRANSACTIONS, 2013, 56 (04) :615-622

[10] The Tribological Behaviors of Self-Lubricating Composites as Filler in Copper Foam [J].

Ji, Keju ;

Shan, Weigen ;

Xia, Yanqiu ;

Dai, Zhendong .

TRIBOLOGY TRANSACTIONS, 2012, 55 (01) :20-31

← 1 2 3 →