Properties of nanostructured TiN-Ni ceramic-metal coatings obtained by ion-plasma vacuum-arc method

Physicomechanical and tribological properties of TiN-Ni ceramic-metal coatings prepared by ion-plasma vacuum-arc deposition are investigated. It is established that the hardness (H) increases from 23 to 54 GPa with the Ni content from 0 to 12 at %, which is determined by the influence of the nanostructured nitride component of coatings. Coefficients HE (-1) and H (3) E (-2), which characterize the material resistance against the elastic and plastic failure deformation, reach 0.104 and 0.567 GPa, respectively. The further increase in the nickel concentration in coatings to 26 at % leads to a decrease in H to 23-25 GPa, which is associated with the influence of the increasing amount of soft plastic metal and the formation of noticeable porosity in the bulk of coatings. The friction coefficient of studied coatings is 0.45, against 0.58 (for the TiN coating) and 0.72 (for the hard-alloy base). The cohesion failure mechanism of TiN-Ni nanostructured coatings (C (Ni) = 2.8-12 at %) is established, and critical loads which characterize the appearance of the first crack (13.5-14.2 N) and the local coating attrition up to the substrate (61.9-64.4 N) are determined. The complete attrition of coatings does not occur up to a load of 90 N, which points to their high adhesion strength. The developed nanostructured ceramic-metal coatings are characterized by high heat resistance up to 800A degrees C.