Influence of sizing formulations on glass/epoxy interphase properties

被引：55

作者：

Dey, Moutushi ^{[1
]}

Deitzel, J. M. ^{[1
]}

Gillespie, J. W., Jr. ^{[1
,2
,3
,4
]}

Schweiger, Scott ^{[5
]}

机构：

[1] Univ Delaware, Ctr Composite Mat, Newark, DE 19716 USA

[2] Dept Mat Sci & Engn, Newark, DE 19716 USA

[3] Dept Civil & Environm Engn, Newark, DE 19716 USA

[4] Univ Delaware, Dept Mech Engn, Newark, DE 19716 USA

[5] Owens Corning, Columbus, OH USA

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2014年 / 63卷

关键词：

Interface/interphase; Silane coupling agent; Film former; Surface morphology; GLASS-FIBER SIZINGS; ENERGY-ABSORPTION; FILM-FORMER; COUPLING AGENTS; FIBER/MATRIX INTERPHASE; MECHANICAL-PROPERTIES; SURFACE-COATINGS; MATRIX ADHESION; COMPOSITES; STRENGTH;

D O I：

10.1016/j.compositesa.2014.04.006

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A series of fiber sizing formulations have been chosen to compare the effect of silane coupling agent and film former on the properties of glass fiber/epoxy interphase. The microdroplet debond test was chosen to measure the strength and energy absorption of the interphases. Results indicate that chemical reactivity and wettability of polymeric film former influence the strength and energy absorption for glass fiber/epoxy interphases. Comparison of amino silane sizings with different film formers show that the azamide-based film former provided a 47% increase in interfacial shear strength over other sizings studied. The results demonstrate that the relative reactivity and wettability of film former can enhance both chemical bond formation and fiber surface roughness. Changes in fiber surface morphology due to application of sizing were observed by Atomic Force Microscopy (AFM). Analysis of failed surfaces indicate that both silane and film former components affect the mode of failure at the interface. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：59 / 67

页数：9

共 36 条

[1]

[Anonymous], PROD INF

[2] The role of sizing resins, coupling agents and their blends on the formation of the interphase in glass fibre composites [J].

Berg, J ;

Jones, FR .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1998, 29 (9-10) :1261-1272

[3]

Bhatnagar M.S., 1996, POLYM MAT ENCY

[4]

Bhatnagar M.S., 1996, Polymeric Materials Encyclopedia, V2, P2233

[5] GLASS-FIBER SIZINGS AND THEIR ROLE IN FIBER MATRIX ADHESION [J].

DROWN, EK ;

ALMOUSSAWI, H ;

DRZAL, LT .

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1991, 5 (10) :865-881

[6]

DRZAL LT, 1986, ADV POLYM SCI

[7] The influence of fibre sizing on the strength and fracture toughness of glass fibre composites [J].

Feih, S ;

Wei, J ;

Kingshott, P ;

Sorensen, BF .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (02) :245-255

[8] Effects of glass fiber size composition (film-former type) on transverse cracking in cross-ply laminates [J].

Fernberg, SP ;

Berglund, LA .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (10) :1083-1090

[9] Effect of fiber surface texture created from silane blends on the strength and energy absorption of the glass fiber/epoxy interphase [J].

Gao, X. ;

Jensen, R. E. ;

Li, W. ;

Deitzel, J. ;

McKnight, S. H. ;

Gillespie, J. W., Jr. .

JOURNAL OF COMPOSITE MATERIALS, 2008, 42 (05) :513-534

[10] Effect of colloidal silica on the strength and energy absorption of glass fiber/epoxy interphases [J].

Gao, X. ;

Jensen, R. E. ;

McKnight, S. H. ;

Gillespie, J. W., Jr. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (11) :1738-1747

← 1 2 3 4 →