Recovery of value-added products from the catalytic pyrolysis of waste tyre

被引:56
|
作者
Shah, J. [1 ]
Jan, M. R. [1 ]
Mabood, F. [1 ]
机构
[1] Univ Peshawar, NWFP, Inst Chem Sci, Peshawar 25120, Pakistan
关键词
Waste tyre; Catalytic pyrolysis; Alumina; Silica; Valuable hydrocarbons; AUTOMOBILE SHREDDER RESIDUES; SCRAP TIRES; VACUUM PYROLYSIS; TEMPERATURE;
D O I
10.1016/j.enconman.2008.12.017
中图分类号
O414.1 [热力学];
学科分类号
摘要
The influence of an acidic (SiO(2)), basic (Al(2)O(3)) and mixture of acidic and basic (Al(2)O(3): SiO(2)) catalyst on the pyrolysis of used tyre rubber has been investigated. The yield of the derived gas, liquid and solid has been studied in term of the temperature, time and amount of catalyst. Oil fractions were analyzed by FTIR spectroscopy and gas chromatography with FID. Oil derived with Al(2)O(3) containing higher concentration of polar hydrocarbons (40%) and lower concentration of aliphatic hydrocarbons while 40% aliphatic hydrocarbons and 30% polar hydrocarbons were found in oil derived with SiO(2). A mixture of catalyst (Al(2)O(3): SiO(2)) gave equal concentration of aliphatic (35%) and polar (35%) hydrocarbons in oil. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:991 / 994
页数:4
相关论文
共 50 条
  • [1] Value-added fuels from the catalytic pyrolysis of Alternanthera philoxeroides
    Bhattacharjee, Neelanjan
    Biswas, Asit Baran
    FUEL, 2021, 295
  • [2] Recent progress of catalytic pyrolysis of plastics to produce high value-added products
    Xiao H.
    Yang H.
    Zhang X.
    Chen Y.
    Wang X.
    Chen H.
    Huagong Xuebao/CIESC Journal, 2022, 73 (08): : 3461 - 3471
  • [3] Catalytic pyrolysis of distillers dried grain with solubles: An attempt towards obtaining value-added products
    Liu, Wen-wu
    Wang, Xiu-ping
    Hu, Chang-wei
    Tong, Dong-mei
    Zhu, Liang-fang
    Li, Gui-ying
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (12) : 6371 - 6383
  • [4] Microwave pyrolysis of polymeric materials: Waste tires treatment and characterization of the value-added products
    Undri, Andrea
    Meini, Stefano
    Rosi, Luca
    Frediani, Marco
    Frediani, Piero
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2013, 103 : 149 - 158
  • [5] Pyrolysis of waste tyre for high-quality fuel products: A review
    Dick, Deinma T.
    Agboola, Oluranti
    Ayeni, Augustine O.
    AIMS ENERGY, 2020, 8 (05) : 869 - 895
  • [6] Strategic hazard mitigation of waste furniture boards via pyrolysis: Pyrolysis behavior, mechanisms, and value-added products
    Foong, Shin Ying
    Liew, Rock Keey
    Lee, Chern Leing
    Tan, Wei Peng
    Peng, Wanxi
    Sonne, Christian
    Tsang, Yiu Fai
    Lam, Su Shiung
    JOURNAL OF HAZARDOUS MATERIALS, 2022, 421
  • [7] Waste tyre valorization by catalytic pyrolysis ? A review
    Arabiourrutia, Miriam
    Lopez, Gartzen
    Artetxe, Maite
    Alvarez, Jon
    Bilbao, Javier
    Olazar, Martin
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2020, 129
  • [8] Pyrolytic Conversion of Plastic Waste to Value-Added Products and Fuels: A Review
    Papari, Sadegh
    Bamdad, Hanieh
    Berruti, Franco
    MATERIALS, 2021, 14 (10)
  • [9] Value-Added Products from Catalytic Pyrolysis of Lignocellulosic Biomass and Waste Plastics over Biochar-Based Catalyst: A State-of-the-Art Review
    Li, Peng
    Wan, Kun
    Chen, Huan
    Zheng, Fangjuan
    Zhang, Zhuo
    Niu, Bo
    Zhang, Yayun
    Long, Donghui
    CATALYSTS, 2022, 12 (09)
  • [10] An integrated utilization strategy of printed circuit boards and waste tire by fast co-pyrolysis: Value-added products recovery and heteroatoms transformation
    Ma, Chuan
    Kumagai, Shogo
    Saito, Yuko
    Kameda, Tomohito
    Yoshioka, Toshiaki
    JOURNAL OF HAZARDOUS MATERIALS, 2022, 430