Measurement of Oil Film Thickness Distribution between a Slipper and Swash Plate in Swash-Plate-Type Axial Piston Pumps

被引：2

作者：

Kawakita, Shigeyoshi ^{[1
,2
]}

Kato, So ^{[2
]}

Tanaka, Shinji ^{[2
]}

Kyogoku, Keiji ^{[2
]}

Kikuchi, Masao ^{[2
]}

Yamamoto, Hiroshi ^{[1
]}

机构：

[1] Komatsu Ltd, Mfg Engn Dev Ctr, 3-1-1 Ueno, Hirakata, Osaka 5731011, Japan

[2] Tokyo Inst Technol, Komatsu Collaborat Res Cluster Innovat Technol, 4259 Nagatsutacho, Midori ku, Yokohama, Kanagawa 2268503, Japan

来源：

TRIBOLOGY ONLINE | 2022年 / 17卷 / 04期

关键词：

tribology; pump; slipper; swashplate; lubricant; film thickness; fluorescence; LIF; LUBRICATION; MOTORS;

D O I：

10.2474/trol.17.283

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, slipper/swash plate sliding test rigs were developed to measure oil film thickness distribution. For this purpose, fluorescence measurement was performed with a sapphire glass swash plate and a light emitting diode as the light source. The oil film thickness distribution was measured under various conditions by varying the rotation speed and the oil pressure supplied to the cylinder. The shape of the swash plate matched the oil film thickness distribution measured via the fluorescent method, thereby confirming the validity of the measurements. Furthermore, the maximum tilt azimuth angle of the slipper turned outward as the rotational speed increased.

引用

页码：283 / 290

页数：8

共 12 条

[1] THE LUBRICATION OF SLIPPERS IN AXIAL PISTON PUMPS AND MOTORS - THE EFFECT OF TILTING COUPLES [J].

HOOKE, CJ ;

LI, KY .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1989, 203 (05) :343-350

[2]

Hotta T., 2004, P INT COMPRESSOR ENG, pC125

[3]

Hoult D. P., 1988, 881587 SAE

[4] CHARACTERISTICS OF A SLIPPER BEARING FOR SWASH PLATE TYPE AXIAL PISTON PUMPS AND MOTORS .2. EXPERIMENT [J].

IBOSHI, N ;

YAMAGUCHI, A .

BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (219) :1583-1589

[5] Measurement of oil film thickness distribution on piston surface using the fluorescence method (development of measurement system) [J].

Inagaki, H ;

Saito, A ;

Murakami, M ;

Konomi, T .

JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 1997, 40 (03) :487-493

[6]

Ivantysyn R, 2017, PROCEEDINGS OF THE 9TH FPNI PH.D SYMPOSIUM ON FLUID POWER, 2016

[7]

Kazama T., 2014, JFPS Int. J. Fluid Power Syst., V8, P10, DOI [10.5739/jfpsij.8.10, DOI 10.5739/JFPSIJ.8.10]

[8] Investigation into the effects of orifice size, offset and overclamp ratio on the lubrication of slipper bearings [J].

Koc, E ;

Hooke, CJ .

TRIBOLOGY INTERNATIONAL, 1996, 29 (04) :299-305

[9]

Kondoh Y., 2006, LANGMUIR, V72, P636

[10]

Mizobuchi N., 1997, JSME INT J B-FLUID T, V40, P487

← 1 2 →