Microstructure evolution and mechanical properties of transient liquid phase bonded Ti-6Al-4V joint with copper interlayer

被引：41
作者：
Deng, Yongqiang [1 ]
Sheng, Guangmin [1 ]
Wang, Fangli [1 ]
Yuan, Xinjian [1 ]
An, Qi [1 ]
机构：
[1] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400044, Peoples R China
来源：
MATERIALS & DESIGN | 2016年 / 92卷
基金：
美国国家科学基金会;
关键词：
Ti-6Al-4V; Copper interlayer; Transient liquid phase bonding; Microstructure; Mechanical properties; WELD HEAT-TREATMENT; NOTCHED TENSILE FRACTURE; TITANIUM-ALLOYS; FATIGUE PROPERTIES; FILLER METALS; TI17; ALLOYS; STRENGTH; TI-15CU-15NI; TEMPERATURE; CP;
D O I：
10.1016/j.matdes.2015.11.103
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure evolution and mechanical properties of transient liquid phase bonded Ti-6Al-4V joint with copper interlayer was investigated by varying the bonding time at 930 degrees C. It was revealed that intensive metallurgical reactions occurred at the Ti-6Al-4V/Cu interface and integral joint consisting of TiCu, Ti2Cu layers and eutectoid structure was obtained for a bonding duration of 1 min. Prolonged holding time resulted in transformation of TiCu into Ti2Cu and subsequently progressive decomposition of the Ti2Cu phase. Ultimately, homogenized joint primarily composed of a -Ti matrix with tiny Ti2Cu platelets was obtained when bonding for 30 min. Tensile tests demonstrated that the homogenized joint exhibited mechanical properties comparable with that of the Ti-6Al-4V parent alloy. These experimental results demonstrate that the transient liquid phase bonding technique employing Cu interlayer is of great potential to be used for joining titanium based alloys. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1 / 7
页数：7
相关论文
共 33 条
  • [21] Shapiro A, 2003, WELD J, V82, P36
  • [22] Contact reactive brazing of Ti53311S alloy using Cu foil as interlayer: Interfacial microstructure and joining properties
    Song, X. G.
    Cao, J.
    Chen, H. Y.
    Wang, H. Q.
    Feng, J. C.
    [J]. MATERIALS & DESIGN, 2013, 46 : 895 - 901
  • [23] Spence PJ, 2013, P IME B, P1
  • [24] A novel Zr-Ti-Ni-Cu eutectic system with low melting temperature for the brazing of titanium alloys near 800 °C
    Sun, Ju-Hyun
    Lee, Dong-Myoung
    Lee, Chi-Hwan
    Hong, Joo-Wha
    Shin, Seung-Yong
    [J]. JOURNAL OF MATERIALS RESEARCH, 2010, 25 (02) : 296 - 302
  • [25] Effects of post-weld heat treatment on fracture toughness of linear friction welded joint for dissimilar titanium alloys
    Tao, B. H.
    Li, Q.
    Zhang, Y. H.
    Zhang, T. C.
    Liu, Y.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 634 : 141 - 146
  • [26] Structural integrity of diffusion bonds in Ti-6Al-4V processed via low cost route
    Tuppen, S. J.
    Bache, M. R.
    Voice, W. E.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2006, 22 (12) : 1423 - 1430
  • [27] Cyclic deformation of dissimilar welded joints between Ti-6Al-4V and Ti17 alloys: Effect of strain ratio
    Wang, S. Q.
    Liu, J. H.
    Lu, Z. X.
    Chen, D. L.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 598 : 122 - 134
  • [28] Strain-controlled fatigue properties of dissimilar welded joints between Ti-6Al-4V and Ti17 alloys
    Wang, S. Q.
    Liu, J. H.
    Chen, D. L.
    [J]. MATERIALS & DESIGN, 2013, 49 : 716 - 727
  • [29] Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys
    Wu, G. Q.
    Shi, C. L.
    Sha, W.
    Sha, A. X.
    Jiang, H. R.
    [J]. MATERIALS & DESIGN, 2013, 46 : 668 - 674
  • [30] Microstructure and properties of diffusion bonded Ti-6Al-4V parts using brazing-assisted hot isostatic pressing
    Wu, Z.
    Mei, J.
    Voice, W.
    Beech, Steve
    Wu, X.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (24): : 7388 - 7394
1234