Dimensional stability of polyurethane rigid foams blown with CO2

被引:9
作者
Cecchini, C
Zannetti, R
Stefani, A
机构
[1] EniChem SpA, Polyurethane & Chlorine Div, Res Ctr, Stabilimento Porto Marghera, I-30175 Venice, Italy
[2] Univ Padua, Inorgan Metallorgan & Analyt Chem Dept, Padua, Italy
关键词
D O I
10.1177/0021955X9903500603
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
In recent years, water level in rigid foam formulations has been increased to such a point that the use of only the water/isocyanate reaction to provide all of the blowing has become a reality, at least for certain applications. Nevertheless, two limiting factors penalize the use of only CO2 blown foams: a too high lambda aged value and a poor dimensional stability. The objective of this research work was to record the variations with time of some parameters that affect dimensional stability of only CO2 blown foams, in order to establish eventual correlation between them and foam behavior.
引用
收藏
页码:514 / +
页数:19
相关论文
共 9 条
[1]  
*ASTM, D212687 ASTM
[2]  
CUNNINGHAM A, 1986, P HEAT TRANSF CRYOEN
[3]  
DAEMS D, 1994, UTECH 94
[4]  
Gibson L., 1988, CELLULAR SOLIDS STRU
[5]  
*ISO, 27961986E ISO
[6]  
PITACCO F, 1991, THESIS U PADUA
[7]  
SINGH SN, 1995, P POL 1995 C CHIC IL, P11
[8]  
Smits G. F., 1993, J CELL PLAST, V29, P57, DOI [10.1177/0021955x9302900104, DOI 10.1177/0021955X9302900104]
[9]   A METHOD FOR ANALYZING THE GAS-PHASE IN POLYURETHANE FOAM [J].
SVANSTROM, M ;
RAMNAS, O .
JOURNAL OF CELLULAR PLASTICS, 1995, 31 (04) :375-388