Fabrication of Electrically Conductive Metal Patterns at the Surface of Polymer Films by Microplasma-Based Direct Writing

被引：35

作者：

Ghosh, Souvik ^{[1
]}

Yang, Rui ^{[2
]}

Kaumeyer, Michelle ^{[2
]}

Zorman, Christian A. ^{[2
]}

Rowan, Stuart J. ^{[3
]}

Feng, Philip X. -L. ^{[2
]}

Sankaran, R. Mohan ^{[1
]}

机构：

[1] Case Western Reserve Univ, Dept Chem Engn, Cleveland, OH 44106 USA

[2] Case Western Reserve Univ, Dept Elect Engn & Comp Sci, Cleveland, OH 44106 USA

[3] Case Western Reserve Univ, Dept Macromol Sci & Engn, Cleveland, OH 44106 USA

来源：

ACS APPLIED MATERIALS & INTERFACES | 2014年 / 6卷 / 05期

基金：

美国国家科学基金会;

关键词：

microplasma; direct write; electrodiffusion; printed electronics; flexible electronics; sheet resistance; ROLL-TO-ROLL; POLY(ACRYLIC ACID); NANOPARTICLES; FEATURES; INKJET;

D O I：

10.1021/am406005a

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

We describe a direct-write process for producing electrically conductive metal patterns at the surface of polymers. Thin films of poly(acrylic acid) (PAA) loaded with Ag ions are reduced by a scanning, atmospheric-pressure microplasma to form crystalline Ag features with a line width of 300 mu m. Materials analysis reveals that the metallization occurs in a thin layer of similar to 5 mu m near the film surface, suggesting that, the Ag ions diffuse to the surface. Sheet resistances of 1-10 Omega/sq are obtained independent of film thickness and Ag volume concentration, which is desirable for producing surface conductivity on polymers while minimizing metal loading.

引用

页码：3099 / 3104

页数：6

共 31 条

[1] Large-Area Roll-to-Roll and Roll-to-Plate Nanoimprint Lithography: A Step toward High-Throughput Application of Continuous Nanoimprinting
Ahn, Se Hyun
Guo, L. Jay
[J]. ACS NANO, 2009, 3 (08) : 2304 - 2310
[2] Selective Metal Pattern Fabrication Through Micro-Contact or Ink-Jet Printing and Electroless Plating onto Polymer Surfaces Chemically Modified by Plasma Treatments
Bessueille, F.
Gout, S.
Cotte, S.
Goepfert, Y.
Leonard, D.
Romand, M.
[J]. JOURNAL OF ADHESION, 2009, 85 (10) : 690 - 710
[3] Ink-jet printing, self-assembled polyelectrolytes, and electroless plating: Low cost fabrication of circuits on a flexible substrate at room temperature
Cheng, K
Yang, MH
Chiu, WWW
Huang, CY
Chang, J
Ying, TF
Yang, Y
[J]. MACROMOLECULAR RAPID COMMUNICATIONS, 2005, 26 (04) : 247 - 264
[4] Formulation and screen printing of water based conductive flake silver pastes onto green ceramic tapes for electronic applications
Faddoul, Rita
Reverdy-Bruas, Nadege
Blayo, Anne
[J]. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2012, 177 (13): : 1053 - 1066
[5] The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, SR
[J]. NATURE, 2004, 428 (6986) : 911 - 918
[6] Localized Ligand Induced Electroless Plating (LIEP) Process for the Fabrication of Copper Patterns Onto Flexible Polymer Substrates
Garcia, Alexandre
Polesel-Maris, Jerome
Viel, Pascal
Palacin, Serge
Berthelot, Thomas
[J]. ADVANCED FUNCTIONAL MATERIALS, 2011, 21 (11) : 2096 - 2102
[7] Comparison of Fast Roll-to-Roll Flexographic, Inkjet, Flatbed, and Rotary Screen Printing of Metal Back Electrodes for Polymer Solar Cells
Hosel, Markus
Sondergaard, Roar R.
Angmo, Dechan
Krebs, Frederik C.
[J]. ADVANCED ENGINEERING MATERIALS, 2013, 15 (10) : 995 - 1001
[8] Inkjet Printing of Conductive Silver Patterns by Using the First Aqueous Particle-Free MOD Ink without Additional Stabilizing Ligands
Jahn, Stephan F.
Blaudeck, Thomas
Baumann, Reinhard R.
Jakob, Alexander
Ecorchard, Petra
Rueffer, Tobias
Lang, Heinrich
Schmidt, Peer
[J]. CHEMISTRY OF MATERIALS, 2010, 22 (10) : 3067 - 3071
[9] Highly Sensitive Antenna Using Inkjet Overprinting with Particle-Free Conductive Inks
Komoda, Natsuki
Nogi, Masaya
Suganuma, Katsuaki
Otsuka, Kanji
[J]. ACS APPLIED MATERIALS & INTERFACES, 2012, 4 (11) : 5732 - 5736
[10] Patterning of poly(acrylic acid) by ionic exchange reactions in microfluidic channels
Lahav, Michal
Narovlyansky, Max
Winkleman, Adam
Perez-Castillejos, Raquel
Weiss, Emily A.
Whitesides, George M.
[J]. ADVANCED MATERIALS, 2006, 18 (23) : 3174 - +

← 1 2 3 4 →