Solvent Transport Characteristics of Thermoplastic Elastomer Blends Based on Nylon and NBR

被引:14
作者
Abraham, Jiji [1 ]
Muraleedharan, K. [1 ]
Kumar, C. Radhesh [1 ]
Thomas, Sabu [1 ]
George, Soney C. [2 ]
机构
[1] Mahatma Gandhi Univ, Int & Inter Univ Ctr Nanosci & Nanotechnol, Kottayam 686560, Kerala, India
[2] Amal Jyothi Coll Engn, Ctr Nanosci & Nanotechnol, Kottayam, Kerala, India
关键词
RUBBER BLENDS; MECHANICAL-PROPERTIES; DENSITY POLYETHYLENE; RHEOLOGICAL BEHAVIOR; MOLECULAR-TRANSPORT; NATURAL-RUBBER; MELT RHEOLOGY; MORPHOLOGY; DIFFUSION; MEMBRANES;
D O I
10.1002/pen.24409
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Transport characteristics of chlorinated hydrocarbon through Nylon/NBR (Acrylonitrile Butadiene Rubber) blend has been investigated with special reference to the effect of blend ratio, compatibilizer and effect of dynamic crosslinking. An attempt has been made to correlate the diffusion characteristics with morphology of the blend. Fine and uniform distribution of the dispersed domains with a stable morphology were obtained by dynamic vulcanization. Depending on the composition, blends show dispersed/matrix and co-continuous phase morphologies. The various transport parameters such as diffusion coefficient (D), permeation coefficient (P) and sorption coefficients (S) were evaluated at different diffusion conditions such as temperature and percentage of compatibilizer. The equilibrium solvent uptake decreases with an increase in the concentration of NBR in the blends. Finally thermodynamic parameters were evaluated from the diffusion data. POLYM. ENG. SCI., 57: 231-236, 2017. (C) 2016 Society of Plastics Engineers.
引用
收藏
页码:231 / 236
页数:6
相关论文
共 50 条
[21]   Compatibility and thermal stability of EPDM-NBR elastomer blends [J].
Botros, SH ;
Tawfic, ML .
JOURNAL OF ELASTOMERS AND PLASTICS, 2005, 37 (04) :299-317
[22]   Surface, structural, and thermal properties of polydimethylsiloxane-based polyurethanes and their blends with thermoplastic polyurethane elastomer [J].
Erceg, Tamara ;
Tanasic, Jelena ;
Banjanin, Bojan ;
Balos, Sebastian ;
Cvetinov, Miroslav ;
Cakic, Suzana ;
Ristic, Ivan .
POLYMER BULLETIN, 2022, 79 (12) :10909-10929
[23]   The dynamic rheological behavior and morphology of nylon/elastomer blends [J].
Wanjie Wang ;
Qiang Zheng .
Journal of Materials Science, 2005, 40 :5545-5547
[24]   The Rheological Design of Aliphatic Polyketone Terpolymer Blends with Polyester Thermoplastic Elastomer [J].
Bae, Jeongsik ;
Kim, Byoung Chul .
MACROMOLECULAR RESEARCH, 2014, 22 (11) :1165-1169
[25]   Compatibilisation of various PLA/thermoplastic elastomer blends with diisocyanate coupling agent [J].
Vuillaume, Pascal Yves ;
Vachon, Andro ;
Grey, William ;
Pepin, Keven ;
Zhang, Chan Juan .
PLASTICS RUBBER AND COMPOSITES, 2018, 47 (03) :95-105
[26]   Thermoplastic elastomer blends based on waste rubber and low-density polyethylene [J].
Hrdlicka, Zdenek ;
Kuta, Antonin ;
Hajek, Jiri .
POLIMERY, 2010, 55 (11-12) :832-838
[27]   Rheology/morphology relationship of immiscible EPDM/PP based thermoplastic elastomer blends [J].
Shahbikian, S. ;
Carreau, P. J. ;
Heuzey, M. C. ;
Ellul, M. D. ;
Nadella, H. P. ;
Cheng, J. ;
Shirodkar, P. .
XVTH INTERNATIONAL CONGRESS ON RHEOLOGY - THE SOCIETY OF RHEOLOGY 80TH ANNUAL MEETING, PTS 1 AND 2, 2008, 1027 :528-+
[28]   Reactive Compatibilization of Multi-Hydroxy Functional Compound Based on Polyoxymethylene/Thermoplastic Polyether Elastomer Blends [J].
Wei Fang ;
Fan, Xiaodong ;
Jin, Zhengwei ;
Li, Ruilong ;
Zhou, Tao .
POLYMER SCIENCE SERIES B, 2020, 62 (06) :724-733
[29]   Novel Biodegradable Thermoplastic Elastomer Based on Poly(butylene succinate) and Epoxidized Natural Rubber Simple Blends [J].
Faibunchan, Parisa ;
Nakaramontri, Yeampon ;
Chueangchayaphan, Wannarat ;
Pichaiyut, Skulrat ;
Kummerloewe, Claudia ;
Vennemann, Norbert ;
Nakason, Charoen .
JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2018, 26 (07) :2867-2880
[30]   Transport studies of thermoplastic polyurethane/natural rubber (TPU/NR) blends [J].
Al Minnath, Mehar ;
Unnikrishnan, G. ;
Purushothaman, E. .
JOURNAL OF MEMBRANE SCIENCE, 2011, 379 (1-2) :361-369