Cavitating Turbulent Flow Simulation in a Francis Turbine Based on Mixture Model

As a numerical method to study the cavitation performance of a Francis turbine, the mixture model for the cavity/liquid two-phase flow is adopted in the cavitating turbulent flow analysis together with the re-normalization group (RNG) k-epsilon turbulence model in the present paper. The direct coupling numerical technique is used to solve the governing equations of the mixture model for the two-phase flow. Unsteady cavitating flow simulation around a hydrofoil of ALE15 is conducted as preliminary evaluation. Then, the cavitating flow in a Francis turbine is treated from the steady flow simulation since the feasibility of the cavitation model to the performance prediction of the turbine is the present major concern. Comparisons of the computational results with the model test data, i.e., the cavitation characteristics of hydraulic efficiency and the overload vortex rope at the draft tube inlet being reproduced reasonably, indicate that the present method has sufficient potential to simulate the cavitating flow in hydraulic turbines. Further, the unsteady cavitating flow simulation through the Francis turbine is conducted as well to study the pressure fluctuation characters caused by the vortex rope in the draft tube at partial load operation. [DOI: 10.1115/1.3112382]