Effects of feeding direction on the hulling of paddy grain in a rubber roll huller

被引：22

作者：

Chen, Peiyu ^{[1
]}

Jia, Fuguo ^{[1
]}

Liu, Hanru ^{[1
]}

Han, Yanlong ^{[1
]}

Zeng, Yong ^{[1
]}

Meng, Xiangyi ^{[1
]}

Xiao, Yawen ^{[1
]}

Li, Gengrun ^{[1
]}

机构：

[1] Northeast Agr Univ, Coll Engn, Harbin 150030, Heilongjiang, Peoples R China

来源：

BIOSYSTEMS ENGINEERING | 2019年 / 183卷

关键词：

Feeding direction; Rubber roll huller; Hulling mechanism; Hulling performance; DEM; ROTATION SPEED; RICE; SIMULATION; MOTION;

D O I：

10.1016/j.biosystemseng.2019.05.001

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The low ratio of one-time hulling is one of the main factors restricting the development of rice processing. Understanding the hulling mechanism and the effect of feeding direction of paddy grain on the hulling performance is the key to increasing the one-time hulling ratio of rubber roll hullers, but the mechanism remains poorly understood. In this work, the effects of the feeding direction on rotation movements were explored using the discrete element method (DEM), observing the microstructure of paddy grain, and conducting the static shearing experiments. The effect of feeding direction on the hulling ratio and hulling pattern were investigated. The results showed that rotation angle increases as feeding direction increases and the axis of rotation of the grain changes from the short to long axis. This difference in rotation leads to differences in the shearing effect of the rubber rolls on the apexes of the grain. From the microstructure of the grain it can be seen that the grain core is wrapped by the lemma and palea under a process of bonding and interlocking. The experimental results show that the process of hulling destroys bonding and interlocking by a shearing action. Therefore, hulling ratio changes with changes in feeding direction. The results were confirmed by hulling experiments using a rubber roll huller and it was verified that feeding direction has a significant effect on the breakage ratio. (C) 2019 IAgrE. Published by Elsevier Ltd. All rights reserved.

引用

页码：196 / 208

页数：13

共 22 条

[11]

Lele J., 2015, THESIS

[12] CFD-DEM simulation of material motion in air-and-screen cleaning device [J].

Li, Hongchang ;

Li, Yaoming ;

Gao, Fang ;

Zhao, Zhan ;

Xu, Lizhang .

COMPUTERS AND ELECTRONICS IN AGRICULTURE, 2012, 88 :111-119

[13] Sensor for monitoring rice grain sieve losses in combine harvesters [J].

Liang, Zhenwei ;

Li, Yaoming ;

Xu, Lizhang ;

Zhao, Zhan .

BIOSYSTEMS ENGINEERING, 2016, 147 :51-66

[14]

Payman M., 2007, J BIOL SCI, V7

[15]

Prabhakaran P., 2017, ARCH METALLURGY MAT, V62

[16] Discrete element method simulation of the hulling process of Jatropha curcas L. fruits [J].

Romuli, Sebastian ;

Karaj, Shkelqim ;

Mueller, Joachim .

BIOSYSTEMS ENGINEERING, 2017, 155 :55-67

[17]

Ruan JingLan Ruan JingLan, 2011, Transactions of the Chinese Society of Agricultural Engineering, V27, P353

[18]

Shitanda D., 2001, Journal of the Japanese Society of Agricultural Machinery, V63, P55

[19]

Shitanda D., 2001, AGR ENG INT CIGR EJO, V3

[20]

Tangpinnikul Nitat, 2010, INT TRAIN COURS POST

← 1 2 3 →