Dielectric Breakdown of Additively Manufactured Polymeric Materials

被引：29
作者：
Monzel, W. Jacob [1 ]
Hoff, Brad W. [1 ]
Maestas, Sabrina S. [1 ]
French, David M. [1 ]
Hayden, Steven C. [2 ]
机构：
[1] Air Force Res Lab, Albuquerque, NM 87117 USA
[2] Los Alamos Natl Lab, Ctr Integrated Nanotechnol, POB 1663, Los Alamos, NM 87545 USA
来源：
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION | 2015年 / 22卷 / 06期
关键词：
Rapid prototyping; dielectric breakdown; plastics; dielectric materials; dielectric measurements; dielectric strength; additive manufacturing; SLA; Polyjet; fused deposition modeling; FDM; SLS;
D O I：
10.1109/TDEI.2015.005199
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Dielectric strength testing of selected Polyjet-printed polymer plastics was performed in accordance with ASTM D149. This dielectric strength data is compared to manufacturer-provided dielectric strength data for selected plastics printed using the stereolithography (SLA), fused deposition modeling (FDM), and selective laser sintering (SLS) methods. Tested Polyjet samples demonstrated dielectric strengths as high as 47.5 kV/mm for a 0.5 mm thick sample and 32.1 kV/mm for a 1.0 mm sample. The dielectric strength of the additively manufactured plastics evaluated as part of this study was lower than the majority of non-printed plastics by at least 15% (with the exception of polycarbonate).
引用
收藏
页码：3543 / 3549
页数：7
相关论文
共 50 条
[41]   Additively Manufactured Conformal All-dielectric Frequency Selective Surface [J].
Mellita, R. Adeline ;
Karthikeyan, S. S. ;
Damodharan, P. .
2020 50TH EUROPEAN MICROWAVE CONFERENCE (EUMC), 2020, :772-775
[42]   Additively manufactured leather-like silk protein materials [J].
Mogas-Soldevila, L. ;
Matzeu, G. ;
Lo Presti, M. ;
Omenetto, F. G. .
MATERIALS & DESIGN, 2021, 203
[43]   Impact response of additively manufactured metallic hybrid lattice materials [J].
Harris, J. A. ;
Winter, R. E. ;
McShane, G. J. .
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 104 :177-191
[44]   Shaping and Characterization of Additively Manufactured Geopolymer Materials for Underwater Applications [J].
Becher, Anton Frederik ;
Zeidler, Henning ;
Gadek, Szymon ;
Korniejenko, Kinga .
APPLIED SCIENCES-BASEL, 2025, 15 (07)
[45]   Energy Consumption of Welding-Based Additively Manufactured Materials [J].
Raju, Nandhini ;
Balaganesan, G. ;
Kumar, Gurunathan Saravana .
ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, :137-148
[46]   Additively Manufactured Alnico Permanent Magnet Materials-A Review [J].
Dussa, Saikumar ;
Joshi, Sameehan S. ;
Sharma, Shashank ;
Krishna, Karri Venkata Mani ;
Radhakrishnan, Madhavan ;
Dahotre, Narendra B. .
MAGNETISM, 2024, 4 (02) :125-156
[47]   Modelling of yielding in additively manufactured materials using modified Tsai-Hill criterion [J].
Clarke, Tim ;
Hosseini, Ali .
PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (01) :739-753
[48]   FUNDAMENTAL INVESTIGATIONS ON THE MACHINABILITY OF ADDITIVELY MANUFACTURED MULTI-MATERIALS [J].
Kelliger, T. ;
Schraknepper, D. ;
Bergs, T. .
MM SCIENCE JOURNAL, 2021, 2021 :5098-5105
[49]   Post-processing treatments to enhance additively manufactured polymeric parts: a review [J].
Tamburrino, F. ;
Barone, S. ;
Paoli, A. ;
Razionale, A., V .
VIRTUAL AND PHYSICAL PROTOTYPING, 2021, 16 (02) :218-251
[50]   Effect of additively manufactured polymeric inserts on impact response of construction safety helmets [J].
Miceli, Andrew ;
Bevil, Grant ;
Simsiriwong, Jutima .
JOURNAL OF ENGINEERING DESIGN AND TECHNOLOGY, 2024,
12345