Dielectric Breakdown of Additively Manufactured Polymeric Materials

被引：29

作者：

Monzel, W. Jacob ^{[1
]}

Hoff, Brad W. ^{[1
]}

Maestas, Sabrina S. ^{[1
]}

French, David M. ^{[1
]}

Hayden, Steven C. ^{[2
]}

机构：

[1] Air Force Res Lab, Albuquerque, NM 87117 USA

[2] Los Alamos Natl Lab, Ctr Integrated Nanotechnol, POB 1663, Los Alamos, NM 87545 USA

来源：

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION | 2015年 / 22卷 / 06期

关键词：

Rapid prototyping; dielectric breakdown; plastics; dielectric materials; dielectric measurements; dielectric strength; additive manufacturing; SLA; Polyjet; fused deposition modeling; FDM; SLS;

D O I：

10.1109/TDEI.2015.005199

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Dielectric strength testing of selected Polyjet-printed polymer plastics was performed in accordance with ASTM D149. This dielectric strength data is compared to manufacturer-provided dielectric strength data for selected plastics printed using the stereolithography (SLA), fused deposition modeling (FDM), and selective laser sintering (SLS) methods. Tested Polyjet samples demonstrated dielectric strengths as high as 47.5 kV/mm for a 0.5 mm thick sample and 32.1 kV/mm for a 1.0 mm sample. The dielectric strength of the additively manufactured plastics evaluated as part of this study was lower than the majority of non-printed plastics by at least 15% (with the exception of polycarbonate).

引用

页码：3543 / 3549

页数：7

共 50 条

[21] Damage tolerance in additively manufactured ceramic architected materials [J].

Thiraux, Raphael ;

Dupuy, Alexander D. ;

Lei, Tianjiao ;

Rupert, Timothy J. ;

Mohraz, Ali ;

Valdevit, Lorenzo .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2022, 42 (13) :5893-5903

[22] Thermodynamically consistent microstructure prediction of additively manufactured materials [J].

Smith, Jacob ;

Xiong, Wei ;

Cao, Jian ;

Liu, Wing Kam .

COMPUTATIONAL MECHANICS, 2016, 57 (03) :359-370

[23] Thermodynamically consistent microstructure prediction of additively manufactured materials [J].

Jacob Smith ;

Wei Xiong ;

Jian Cao ;

Wing Kam Liu .

Computational Mechanics, 2016, 57 :359-370

[24] Calibration of Failure Criteria for Additively Manufactured Metallic Materials [J].

Socha, Grzegorz .

MATERIALS, 2021, 14 (13)

[25] Review of Additively Manufactured Polymeric Metamaterials: Design, Fabrication, Testing and Modeling [J].

Almesmari, Abdulla ;

Baghous, Nareg ;

Ejeh, Chukwugozie J. ;

Barsoum, Imad ;

Abu Al-Rub, Rashid K. .

POLYMERS, 2023, 15 (19)

[26] Predicting the Strength of Additively Manufactured Polymeric Nanocomposites Based on the Filament Properties [J].

Rafiee, Roham ;

Amohaji, Hirad .

POLYMER COMPOSITES, 2025,

[27] Simulation of Dielectric Breakdown in Semicrystalline Polymeric Insulation [J].

Chen, George .

2016 IEEE INTERNATIONAL CONFERENCE ON HIGH VOLTAGE ENGINEERING AND APPLICATION (ICHVE), 2016,

[28] Electrical Breakdown of Polymeric Insulating Materials [J].

Nagao, Masayuki .

2015 IEEE 11TH INTERNATIONAL CONFERENCE ON THE PROPERTIES AND APPLICATIONS OF DIELECTRIC MATERIALS, 2015, :22-29

[29] Feasibility of Additively Manufactured Tunable Liquid Crystal Loaded Dielectric Waveguides [J].

Tesmer, Henning ;

Gold, Gerald ;

Bachbauer, Felix ;

Polat, Ersin ;

Sippel, Mark ;

Jakoby, Rolf ;

Vossiek, Martin ;

Maune, Holger .

IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2021, 31 (08) :973-976

[30] Properties and applications of additively manufactured metallic cellular materials: A review [J].

du Plessis, Anton ;

Razavi, Nima ;

Benedetti, Matteo ;

Murchio, Simone ;

Leary, Martin ;

Watson, Marcus ;

Bhate, Dhruv ;

Berto, Filippo .

PROGRESS IN MATERIALS SCIENCE, 2022, 125

← 1 2 3 4 5 →