Influence of slag composition on bearing steel cleanness

被引：47

作者：

Ma, W. -J. ^{[1
,2
]}

Bao, Y. -P. ^{[1
,2
]}

Wang, M. ^{[1
,2
]}

Zhao, D. W. ^{[1
,2
]}

机构：

[1] Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 100083, Peoples R China

[2] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China

来源：

IRONMAKING & STEELMAKING | 2014年 / 41卷 / 01期

关键词：

Bearing steel; Cleanness; Slag; Inclusion; INCLUSIONS;

D O I：

10.1179/1743281212Y.0000000096

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Al2O3 and high Al2O3 content composite oxides are the main types of inclusions in aluminium killed bearing steel, and these also have the most significant impact on rolling contact fatigue (RCF) life. The calculation results in the phase diagram by using the FactSage showed that the activity of Al2O3 reached the minimum with the slag composition in a low melting point area at a MgO content less than 5%; a basicity of 5 to 8 and a ratio of CaO/Al2O3 of 1.5 to 2.0 in slag. This slag was most effective in improving the absorption ability of slag for inclusions in bearing steel. By using the experimental slag, the total oxygen could be reduced to 7-10 ppm at Hangzhou Iron and Steel Group Company (HIRGC).

引用

页码：26 / 30

页数：5

共 17 条

[1]

Akashi G., 1999, WIRE J INT, V32, P92

[2]

[Anonymous], 2003, CLEANNESS AND FATIGU

[3] MgO Saturation in Secondary Metallurgical Lime-aluminate and Lime-silicate Slags [J].

Brueggmann, C. ;

Poetschke, J. .

STEEL RESEARCH INTERNATIONAL, 2011, 82 (04) :422-427

[4] Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions [J].

Hashimoto, Kazuya ;

Fujimatsu, Takeshi ;

Tsunekage, Norimasa ;

Hiraoka, Kazuhiko ;

Kida, Katsuyuki ;

Santos, Edson Costa .

MATERIALS & DESIGN, 2011, 32 (03) :1605-1611

[5]

Itoh H, 1998, TETSU TO HAGANE, V84, P85

[6] Formation of MgO•Al2O3 inclusions in high strength alloyed structural steel refined by CaO-SiO2-Al2O3-MgO slag [J].

Jiang, Min ;

Wang, Xinhua ;

Chen, Bin ;

Wang, Wanjun .

ISIJ INTERNATIONAL, 2008, 48 (07) :885-890

[7] Viscosities of LF slags and their impact on ladle refining [J].

Jonsson, PG ;

Jonsson, L ;

Sichen, D .

ISIJ INTERNATIONAL, 1997, 37 (05) :484-491

[8]

Kawakami K., 2004, NMS ISIJ, V182, P153

[9] Investigation of Ti inclusions in wire cord steel [J].

Liu, H. Y. ;

Wang, H. L. ;

Li, L. ;

Zheng, J. Q. ;

Li, Y. H. ;

Zeng, X. Y. .

IRONMAKING & STEELMAKING, 2011, 38 (01) :53-58

[10]

Lund T., 1988, AM SOC TEST MATER, V987, P308

← 1 2 →