Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system

被引:569
作者
Salishchev, G. A. [1 ]
Tikhonovsky, M. A. [2 ]
Shaysultanov, D. G. [1 ]
Stepanov, N. D. [1 ]
Kuznetsov, A. V. [1 ]
Kolodiy, I. V. [2 ]
Tortika, A. S. [2 ]
Senkov, O. N. [3 ]
机构
[1] Belgorod State Univ, Lab Bulk Nanostruct Mat, Belgorod 803015, Russia
[2] NAS Ukraine, Kharkov Phys & Technol Inst, Natl Sci Ctr, UA-61108 Kharkov, Ukraine
[3] UES Inc, Dayton, OH 45432 USA
关键词
High-entropy alloys; Crystal structure; sigma phase; Mechanical properties; SOLID-SOLUTION PHASE; TENSILE PROPERTIES; WEAR-RESISTANCE; MICROSTRUCTURE; STABILITY; CAST;
D O I
10.1016/j.jallcom.2013.12.210
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Microstructure and mechanical properties of equimolar composition alloys FeCrCoNi, FeCrCoNiV, FeCrCoNiMn and FeCrCoNiMnV were studied in as-solidified and annealed conditions. The FeCrCoNi and FeCrCoNiMn alloys were single-phase FCC solid-solutions in both conditions. However, the FeCrCoNiV and FeCrCoNiMnV alloys consisted of the intermetallic sigma-phase matrix with a tetragonal crystal lattice and precipitates of a disordered FCC phase. The crystal structures of these alloys were found to be not affected by annealing. A number of criteria were considered to explain phase composition of the studied alloys. It was shown that poor compatibility of V with other alloying elements caused significant distortions of FCC solid solution and thus promoted formation of the sigma phase. Tensile and compressive properties of these alloys together with their microhardness were determined. Significant strengthening accompanied by the loss of ductility due to formation of the sigma phase was demonstrated in the V containing alloys. The characteristics of the microstructure formation in the studied alloys were discussed. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:11 / 21
页数:11
相关论文
共 38 条
[1]  
*ASM INT, 1992, ASM HDB, V1
[2]  
Baker H., 1992, ALLOY PHASE DIAGRAMS, V3, P2
[3]   Microstructural development in equiatomic multicomponent alloys [J].
Cantor, B ;
Chang, ITH ;
Knight, P ;
Vincent, AJB .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218
[4]   Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0.5CoCrCuFeNi high-entropy alloy [J].
Chen, Min-Rui ;
Lin, Su-Jien ;
Yeh, Jien-We | ;
Chen, Swe-Kai ;
Huang, Yuan-Sheng ;
Chuang, Ming-Hao .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (05) :1363-1369
[5]   Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤2) high-entropy alloys [J].
Chou, Hsuan-Ping ;
Chang, Yee-Shyi ;
Chen, Swe-Kai ;
Yeh, Jien-Wei .
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2009, 163 (03) :184-189
[6]   Tensile properties of high- and medium-entropy alloys [J].
Gali, A. ;
George, E. P. .
INTERMETALLICS, 2013, 39 :74-78
[7]   Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys [J].
Guo, Sheng ;
Ng, Chun ;
Lu, Jian ;
Liu, C. T. .
JOURNAL OF APPLIED PHYSICS, 2011, 109 (10)
[8]   Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase [J].
Guo, Sheng ;
Liu, C. T. .
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2011, 21 (06) :433-446
[9]  
Hall E.O., 1966, METALLURGICAL REV, V11, P61
[10]   Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition [J].
Hsu, CY ;
Yeh, JW ;
Chen, SK ;
Shun, TT .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (05) :1465-1469