Numerical-experimental approach to assess the deflection behaviour of carbon fibre fishing rod

被引：0

作者：

Manssor, Nur Aini Sabrin ^{[1
]}

Ismail, A. M. M. ^{[1
]}

Abidin, Nurrul Amilin Zainal ^{[1
]}

Aziz, Mohd Azran ^{[2
]}

Mahmud, Jamaluddin ^{[2
]}

机构：

[1] Univ Teknol MARA, Fac Mech Engn, Kampus Pasir Gudang, Cawangan Johor, Johor, Malaysia

[2] Univ Teknol MARA, Fac Mech Engn, Shah Alam, Selangor, Malaysia

来源：

6TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING 2019 (ICAME 2019) | 2020年 / 834卷

关键词：

D O I：

10.1088/1757-899X/834/1/012065

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Deflection of a commercial hollow type fishing rod is investigated in this research. The fishing rod of interest is of Abu Garcia brand, made of carbon fibre. Analytical, experimental and numerical approach were performed to assess the bending of the rod under maximum 1.25 kg load located at the tip which represents the rod in pulling. The deflection is defined by longitudinal displacement of each point of guide rings located along the fishing rod. A mathematical model based on basic bending theory of cantilevered beam is formulated to obtain the deflection and then experiment was carried out by immobilizing one end horizontally on the wall and applying at tip force. The final position of the rings was marked, and the displacements were recorded. Finite element model was developed as an isotropic and elastic material via ANSYS software. Results from all approach were compared and it was found that analytical and numerical able to predict a similar trend of bending behaviour. However, large discrepancies were observed in the experimental curves due to several reasons.

引用

页数：8

共 13 条

[1] [Anonymous], 2009, D FLEX FEA REPORT
[2] High modulus carbon fibre composites: Correlation between transverse tensile and mode I interlaminar fracture properties
Baral, Nicolas
Guezenoc, Herve
Davies, Peter
Baley, Christophe
[J]. MATERIALS LETTERS, 2008, 62 (6-7) : 1096 - 1099
[3] Chang D., 2006, MATH ANAL FLY FISHIN
[4] Diridollou S., 2000, SKI RES TECHNOL
[5] Numerical model for the dynamics of a coupled fly line/fly rod system and experimental validation
Gatti-Bono, C
Perkins, NC
[J]. JOURNAL OF SOUND AND VIBRATION, 2004, 272 (3-5) : 773 - 791
[6] Ghuku S., 2016, ENG SCI TECHNOL INT
[7] Ghuku S., 2017, REV STRESS DEFORMATI
[8] THE LARGE DEFORMATION ANALYSIS OF A GRAPHITE FISHING ROD
OHNISHI, H
MATSUZAKI, A
[J]. COMPUTERS & STRUCTURES, 1985, 21 (1-2) : 265 - 271
[9] Ohtsuki A., 2001, ANAL CHARACTERISTICS
[10] Sharma P. K., 2010, STUDIES HLTH TECHNOL

← 1 2 →