Research on the effect of dip angle in mining direction on drum loading performance: a discrete element method

被引：21

作者：

Gao, Kuidong ^{[1
]}

Wang, Liping ^{[2
,3
]}

Du, Changlong ^{[4
]}

Li, Jiannan ^{[5
]}

Dong, Jianghui ^{[6
]}

机构：

[1] Shandong Univ Sci & Technol, Coll Mech & Elect Engn, Qingdao, Shandong, Peoples R China

[2] Univ South Australia, Sansom Inst Hlth Res, Adelaide, SA 5001, Australia

[3] Univ South Australia, Sch Pharm & Med Sci, Adelaide, SA 5001, Australia

[4] China Univ Min & Technol, Coll Mech & Elect Engn, Xuzhou, Jiangsu, Peoples R China

[5] Shandong Univ Sci & Technol, Coll Mat Sci & Engn, Qingdao, Shandong, Peoples R China

[6] Univ South Australia, Sch Nat & Built Environm, Adelaide, SA 5095, Australia

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017年 / 89卷 / 5-8期

关键词：

Drum loading performance; Coal loading with drum pushing; Coal loading with drum ejection; Dip angle in mining direction; Particle loading rate; POLYHEDRAL BLOCKS; MODEL; FORMULATION;

D O I：

10.1007/s00170-016-9251-7

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Poor performance in coal loading of thin coal shearer is the main reason affecting thin coal mining efficiency. In the paper, the development of thin coal shearer coal loading performance was summarized and the lack of the related researches was pointed out. According to the working features of dip angle of thin coal shearer at the different working faces, a simplified model of drum coal loading was set up. The influence rules of dip angle on drum pushing and drum ejection coal loading performance were studied by discrete element method (DEM) simulations and the prime factors of drum coal loading rate significantly influenced by dip angle were identified. In addition, according to the poor drum coal loading rate, the improvement suggestions were proposed, and verified through DEM simulation.

引用

页码：2323 / 2334

页数：12

共 29 条

[1]

[Anonymous], 2011, THESIS

[2]

Ayhan M, 2006, J S AFR I MIN METALL, V106, P51

[3]

Ayhan M., 1994, THESIS

[4]

Baker G.C., 1994, Granular Matter. An Interdisciplinary Approach, P35

[5]

Bo Y., 2005, THESIS

[6]

Brijes M., 2007, Analysis of Cutting Parameters and Heat Generation on Bits of a Continuous Miner-Using Numerical and Experimental Approach

[7]

Brooker CM, 1979, COLLIERY GUARDIA APR, P41

[8] RAPID GRANULAR FLOWS [J].

CAMPBELL, CS .

ANNUAL REVIEW OF FLUID MECHANICS, 1990, 22 :57-92

[9]

Cundall P., 1971, Proceedings of the Symposium of the International Society of Rock Mechanics, V1, P1671

[10] FORMULATION OF A 3-DIMENSIONAL DISTINCT ELEMENT MODEL .1. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS [J].

CUNDALL, PA .

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES & GEOMECHANICS ABSTRACTS, 1988, 25 (03) :107-116

← 1 2 3 →