Isothermal Oxidation Behavior of Ferritic Oxide Dispersion Strengthened Alloy at High Temperatures

被引：4

作者：

Basuki, Eddy Agus ^{[1
]}

Adrianto, Nickolas ^{[1
]}

Triastomo, Rahmadhani ^{[1
]}

Korda, Akhmad Ardian ^{[1
]}

Achmad, Tria Laksana ^{[1
]}

Muhammad, Fadhli ^{[1
]}

Prajitno, Djoko Hadi ^{[2
]}

机构：

[1] Inst Teknol Bandung, Fac Min & Petr Engn, Dept Met Engn, Jalan Ganesa 10, Bandung 40132, Indonesia

[2] Natl Atom Agcy Indonesia, Nucl Technol Ctr Mat & Radiometry, Jalan Tamansari 71, Bandung 40132, Indonesia

来源：

JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES | 2022年 / 54卷 / 02期

关键词：

ferritic steel; interdiffusion; isothermal oxidation; mechanical alloying; oxide dispersion strengthening; MECHANICAL-PROPERTIES; MICROSTRUCTURE; RESISTANCE;

D O I：

10.5614/j.eng.technol.sci.2022.54.2.10

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper discusses the oxidation behaviors of ODS steel alloy of Fe-16Cr-4Al-1Ni-0.4ZrO(2) at 700 degrees C, 800 degrees C, and 900 degrees C. X-ray diffraction (XRD) as well as X-ray mapping in a scanning electron microscope were used to characterize the oxidation behavior of the samples. The rate of oxidation was measured based on the thickness of the oxide formed on the surface of the samples. Six types of oxides were identified in all ODS Fe-16Cr-4Al-1Ni-0.4ZrO(2) alloy samples after the oxidation tests, dominated by Fe2O3, Fe3O4, Cr2FeO4, AlFeO3, Al2FeO4, and AlFe2O4. The oxidation kinetics of ODS Fe-16Cr-4Al-1Ni-0.4ZrO(2) steel at 700, 800, and 900 degrees C followed logarithmic oxidation rate behavior.

引用

页码：370 / 382

页数：13

共 20 条

[1]

[Anonymous], 2018, CLIM CHANG NUCL POW

[2]

Arostegui D.A., 2019, ADV NUCL REACTORS TE

[3]

Benz H.U., 2017, 4 INT C POWD MET AS

[4]

Birks N., 1983, INTRO HIGH TEMPERATU

[5] Thermodynamic Analysis of the Corrosion of Fe-16Cr Alloy Interconnect of Solid Oxide Fuel Cell under Various Atmospheres [J].

Chen, Zhiyuan ;

Wang, Lijun ;

Li, Fushen ;

Chou, Kuochih .

HIGH TEMPERATURE MATERIALS AND PROCESSES, 2014, 33 (05) :439-445

[6] High temperature oxidation of FeCrAl-alloys - influence of Al-concentration on oxide layer characteristics [J].

Engkvist, J. ;

Bexell, U. ;

Grehk, M. ;

Olsson, M. .

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2009, 60 (11) :876-881

[7] Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP [J].

Garcia-Junceda, Andrea ;

Garcia-Rodriguez, Nerea ;

Campos, Monica ;

Carton-Cordero, Marta ;

Torralba, Jose Manuel .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2015, 98 (11) :3582-3587

[8] Utilizing FeCrAl Oxidation Resistance Properties in Water, Air and Steam for Accident Tolerant Fuel Cladding. [J].

Gupta, V. K. ;

Larsen, M. ;

Rebak, R. B. .

HIGH TEMPERATURE CORROSION AND MATERIALS CHEMISTRY 13, 2018, 85 (02) :3-12

[9] Internal oxidation and nitridation behavior of an Fe-5 mass%Al alloy at 1073 K [J].

Hayashi, S ;

Narita, T .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1999, 63 (10) :1311-1316

[10] Effect of Yttrium as Alloying Element on a Model Alumina-Forming Alloy Oxidation at 1100 A°C [J].

Issartel, Christophe ;

Buscail, Henri ;

Chevalier, Sebastien ;

Favergeon, Jerome .

OXIDATION OF METALS, 2017, 88 (3-4) :409-420

← 1 2 →