Low temperature spark plasma sintering of Al2O3-TiC composites

被引：21

作者：

Meir, S. ^{[1
]}

Kalabukhov, S. ^{[1
]}

Hayun, S. ^{[1
]}

机构：

[1] Ben Gurion Univ Negev, Dept Mat Engn, IL-84105 Beer Sheva, Israel

来源：

CERAMICS INTERNATIONAL | 2014年 / 40卷 / 08期

关键词：

Aluminum oxide; Ceramic composite; Spark plasma sintering (SPS); Titanium carbide; MECHANICAL-PROPERTIES; MICROSTRUCTURE; TOOLS;

D O I：

10.1016/j.ceramint.2014.04.059

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al2O3-TiC composites were fabricated using spark plasma sintering (SPS) technology between 1300 degrees C and 1500 degrees C. The composite densification process starts at 950 degrees C, with a maximum densification rate at 1170 degrees C. After thirty minutes soaking at 1400 degrees C, a relative density of 99.5% was achieved. Microstructure analysis reveals a submicron Al2O3 grain size and homogenous distribution of titanium carbide in the matrix. The fully dense Al2O3-20 wt% TiC composite exhibits high values of fracture toughness (8.3 MPa m(1/2)), Young's modulus (406 GPa), flexural strength (850 MPa) and hardness (21 GPa). (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：12187 / 12192

页数：6

共 50 条

[31] Densification,microstructure,and fracture behavior of TiC/Si3N4 composites by spark plasma sintering
BAI Ling GE Changchun SHEN Weiping MAO Xiaodong ZHANG Ke Laboratory of Special Ceramics and Powder Metallurgy
RareMetals, 2008, (03) : 315 - 319
[32] Production of Al2O3-SiC nano-composites by spark plasma sintering
Razavi, Mansour
Farajipour, Ali Reza
Zakeri, Mohammad
Rahimipour, Mohammad Reza
Firouzbakht, Ali Reza
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2017, 56 (04): : 186 - 194
[33] Synthesis and characterization of Al2O3-TiC-ZrO2 ceramics with intragranular nanostructure by spark plasma sintering
Wang, Zhiyong
Yi, Mingdong
Zheng, Kai
Chen, Zhaoqiang
Xiao, Guangchun
Xu, Chonghai
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (04) : 2281 - 2288
[34] Mechanical and Friction Properties of Al2O3-ZrO2-TiC Composite with Varying TiC Contents Fabricated by Spark Plasma Sintering
Zhu, Yabin
Chai, Jianlong
Shen, Tielong
Wang, Zhiguang
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (02): : 767 - 775
[35] Sintering behavior and mechanical properties of WC-Al2O3 composites prepared by spark plasma sintering (SPS)
Chen, Wei-Hsio
Lin, Hao-Tung
Nayak, Pramoda K.
Chang, Man-Ping
Huang, Jow-Lay
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 414 - 417
[36] Reactive, nonreactive, and flash spark plasma sintering of Al2O3/SiC composites-A comparative study
Torosyan, Karen S.
Sedegov, Alexey S.
Kuskov, Kirill, V
Abedi, Mohammad
Arkhipov, Dmitry, I
Kiryukhantsev-Korneev, Philipp, V
Vorotilo, Stepan
Moskovskikh, Dmitry O.
Mukasyan, Alexander S.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2020, 103 (01) : 520 - 530
[37] Fabrication of Ti-Al2O3-HA composites by spark plasma sintering and its properties for medical applications
Mohammadtaheri, Mahya
Bozorg, Mansoor
Yazdani, Arash
Salehi, Majid
JOURNAL OF MATERIALS RESEARCH, 2022, 37 (16) : 2571 - 2580
[38] Spark Plasma Sintering and tribological behavior of Ti3SiC2-Ti5Si3-TiC composites
Benamor, A.
Hadji, Y.
Chiker, N.
Haddad, A.
Guedouar, B.
Labaiz, M.
Hakem, M.
Tricoteaux, A.
Nivot, C.
Erauw, J. P.
Badji, R.
Hadji, M.
CERAMICS INTERNATIONAL, 2019, 45 (17) : 21781 - 21792
[39] Spark plasma sintering of ZrO2-Al2O3 nanocomposites at low temperatures aided by amorphous powders
Xu, Xiqing
Tao, Tiyue
Zhang, Xin
Cao, Zhanzhi
Huang, Di
Liang, Hongchan
Hu, Yinglu
CERAMICS INTERNATIONAL, 2020, 46 (04) : 4365 - 4370
[40] Rapidly sintering TiC/SiC composites by spark plasma sintering (SPS) technique
Wang, LJ
Jiang, W
Bai, SQ
Chen, LD
RARE METAL MATERIALS AND ENGINEERING, 2003, 32 : 214 - 216

← 1 2 3 4 5 →