Effects of Drying Schedules on Physical and Mechanical Properties in Paulownia Wood

被引：8
作者：
Tari, Seyied Mahmoud Miri [1 ]
Habibzade, Siroos [2 ]
Taghiyari, Hamid R. [3 ]
机构：
[1] Univ Tehran, Wood & Paper Sci & Technol Dept, Karaj, Iran
[2] Gorgan Univ Agr Sci & Natural Resources, Wood & Paper Engn Dept, Gorgan, Iran
[3] Shahid Rajaee Teacher Training Univ, Fac Civil Engn, Wood Sci & Technol Dept, Tehran, Iran
来源：
DRYING TECHNOLOGY | 2015年 / 33卷 / 15-16期
关键词：
Diffusion; Drying schedule; Fast-growing wood species; Forest product laboratory recommendations (FPL); Kiln drying; Mechanical properties; LIQUID PERMEABILITY; BEECH WOOD; TEMPERATURE; LUMBER; GAS;
D O I：
10.1080/07373937.2014.948553
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The effects of six drying schedules on physical and mechanical properties of Paulownia wood (Paulownia fortune Seem.) were studied. Three schedules were based on the recommendations by Forest Product Laboratory (FPL), while the other three were established based on diffusion theory. FPL schedules consisted of a mild (T6E3), a moderate (T6E4), and a severe (T7E4) drying schedule; diffusion schedules consisted of three initial moisture contents (MC) of 113% (Dif-1), 75.5% (Dif-2), and 53.5% (Dif-3). Boards with a commercial thickness of 5cm were randomly dried to the final moisture content of 8 +/- 2% in all six schedules. Results indicated that drying under diffusion schedules had the most improved properties due to the beneficial effect of heat upon wood plasticity. However, lower plasticity effect in FPL schedules, due to lower temperatures, resulted in lower properties in most cases.
引用
收藏
页码：1981 / 1990
页数：10
相关论文
共 23 条
[21]   Effects of diffusion drying schedules on gas and liquid permeability in Paulownia fortunei wood [J].
Taghiyari, Hamid Reza ;
Oladi, Reza ;
Tari, Seyied Mahmoud Miri ;
Habibzade, Siroos .
BOSQUE, 2014, 35 (01) :101-110
[22]   Effects of Wood Drying Schedules on Fluid Flow in Paulownia Wood [J].
Taghiyari, Hamid Reza ;
Habibzade, Siroos ;
Tari, Seyied Mahmoud Miri .
DRYING TECHNOLOGY, 2014, 32 (01) :89-95
[23]  
Thiam M, 2002, FOREST PROD J, V52, P64
123