Multi-layered adsorption of 3Y-ZrO2 nanoparticles on polystyrene microsphere

被引：1
|
作者：
Shen, Liya [1 ]
Liu, Mingjian [1 ]
Liu, Xiaozhen [1 ]
Deng, Lei [1 ]
Li, Bo [1 ]
机构：
[1] Lanzhou Univ, Dept Mat Sci, Lanzhou 730000, Peoples R China
来源：
MATERIALS RESEARCH BULLETIN | 2006年 / 41卷 / 10期
关键词：
ceramics; multilayers; polymers; microstructure; surface properties;
D O I：
10.1016/j.materresbull.2006.03.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Multi-layered adsorption of 3Y-ZrO2 nanoparticles on polystyrene (PS) microsphere using layer-by-layer (LBL) assembly technique was investigated. By employing sodium poly (acrylic acid) (PAANa) and polyethylenimine (PEI) to modify the zeta potential of the powders, the heterocoagulation takes place between the coating powders and microspheres substrate and the zirconia coating on the surface of polystyrene spheres was successfully formed. Dense, uniform multi-layered zirconia can be obtained on the surface of polystyrene spheres and the thickness of zirconia coating increased by repeating the coating process. The diameter of the spheres expands to 1.5 mu m after the first coating and 1.65 mu m after the third coating comparing with the original polystyrene spheres with diameter of 1.4 mu m. (C) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1891 / 1901
页数：11
相关论文
共 50 条
  • [1] Mechanical properties of 12Ce-ZrO2/3Y-ZrO2 composites
    Turon-Vinas, M.
    Roa, J. J.
    Marro, F. G.
    Anglada, M.
    CERAMICS INTERNATIONAL, 2015, 41 (10) : 14988 - 14997
  • [2] Fabrication and properties of machinable 3Y-ZrO2/BN nanocomposites
    Li, YL
    Zhang, JX
    Qiao, GJ
    Jin, ZH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 397 (1-2): : 35 - 40
  • [3] Mechanical properties of 3Y-ZrO2/Ni composites prepared by reductive sintering
    Kondo, H
    Sekino, T
    Choa, YH
    Niihara, K
    SCIENCE OF ENGINEERING CERAMICS II, 1999, 2 : 419 - 422
  • [4] Effect of 3Y-ZrO2 addition on the phase, mechanical, and microstructural properties of Al2O3-ZrO2 ceramics
    Lu, Jianning
    Wang, Juan
    Zheng, Kaihong
    Feng, Bo
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2025, 108 (06)
  • [5] Microstructure and mechanical properties of WC-TiC0.4 composites doped with ZrO2 or 3Y-ZrO2
    Jiao, Zijian
    Li, Yanguo
    Zou, Qin
    Luo, Yongan
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 114
  • [6] Influence of Starch Type on Characteristics of Porous 3Y-ZrO2 Prepared from a Direct Consolidation Casting Method
    Beatriz Garrido, Liliana
    Patricia Albano, Maria
    Genova, Luis Antonio
    Plucknett, Kevin Paul
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2011, 14 (01): : 39 - 45
  • [7] Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO2
    Maniere, Charles
    Zahrah, Tony
    Olevsky, Eugene A.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2017, 100 (06) : 2439 - 2450
  • [8] Strain rate sensitivity of a Cu/Al2O3 multi-layered thin film
    Kalacska, Szilvia
    Petho, Laszlo
    Kermouche, Guillaume
    Michler, Johann
    Ispanovity, Peter Dusan
    SURFACE & COATINGS TECHNOLOGY, 2025, 498
  • [9] Metastable phase formation during flame spray pyrolysis of ZrO2(Y2O3)-Al2O3 nanoparticles
    Suffner, J.
    Wang, D.
    Kuebel, C.
    Hahn, H.
    SCRIPTA MATERIALIA, 2011, 64 (08) : 781 - 784
  • [10] Long periodic structure in ZrO2-Y2O3 ceramics
    Rao, JC
    Zhou, Y
    Li, DX
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2004, 20 (02) : 226 - 227
12345