The effects of co-wound Kapton, stainless steel and copper, in comparison with no insulation, on the time constant and stability of GdBCO pancake coils

被引：95

作者：

Lee, Tae Sung ^{[1
]}

Hwang, Young Jin ^{[1
]}

Lee, Jiho ^{[1
]}

Lee, Woo Seung ^{[1
]}

Kim, Jinsub ^{[1
]}

Song, Seung Hyun ^{[1
]}

Ahn, Min Cheol ^{[2
]}

Ko, Tae Kuk ^{[1
]}

机构：

[1] Yonsei Univ, Sch Elect & Elect Engn, Seoul 120749, South Korea

[2] Kunsan Natl Univ, Dept Elect Engn, Jeonbuk, South Korea

来源：

SUPERCONDUCTOR SCIENCE & TECHNOLOGY | 2014年 / 27卷 / 06期

关键词：

superconducting coil; no insulation; partial insulation; time constant; stability;

D O I：

10.1088/0953-2048/27/6/065018

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Recently, studies of partially insulated, high-temperature superconducting (HTS) coils have shown application in the design and construction of compact, stable and self-protecting HTS coils. This article presents the electrical characteristics of HTS coils based on the turn-to-turn inserted materials and conditions. Three partially co-wound pancake coils were fabricated and tested. Each coil was partially co-wound with Kapton, stainless steel and copper tape at every fourth turn of the winding. Tested coils were co-wound on every turn with Kapton, stainless steel and copper tape, and coils without turn-to-turn insulation were the control group. Charge-discharge, sudden-discharge and over-current tests were performed to evaluate the performance of the fabricated coils. The experimental results show that the properties of materials inserted into the coil can control the time constant (t). Therefore, HTS coils can be designed for specific purposes according to the time constant control. The experimental results of the study could be useful in designing HTS coil applications.

引用

页数：8

共 12 条

[1] Superconducting magnet system of the CMD-2 detector
Barkov, LM
Bashtovoy, NS
Bragin, AV
Karpov, SV
Okhapkin, VS
Pivovarov, SG
Ruban, AA
Smakhtin, VP
Snopkov, IG
[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1999, 9 (04) : 4644 - 4647
[2] Choi S., 2012, IEEE T APPL SUPERCON, V22
[3] The effects of partial insulation winding on the charge-discharge rate and magnetic field loss phenomena of GdBCO coated conductor coils
Choi, Y. H.
Kim, K. L.
Kwon, O. J.
Kang, D. H.
Kang, J. S.
Ko, T. K.
Lee, H. G.
[J]. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2012, 25 (10)
[4] Partial insulation of GdBCO single pancake coils for protection-free HTS power applications
Choi, Y. H.
Hahn, S.
Song, J. B.
Yang, D. G.
Lee, H. G.
[J]. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2011, 24 (12)
[5] Gomory F., 1986, P CRYOPRAGUE SEP, V86, P197
[6] Hahn S., 2012, IEEE Trans. Appl. Supercond., V22
[7] Hahn S, 2011, IEEE T APPL SUPERCON, V21, P1592, DOI [10.1109/TASC.2010.2093492, 10.1109/tasc.2010.2093492]
[8] Hwang Y J, 2013, IEEE T APPL SUPERCON, V23
[9] The study on improving the self-protection ability of HTS coils by removing the insulation and lamination of the various metal tapes
Kim, S. B.
Kaneko, T.
Saito, A.
Kajikawa, H.
Joo, J. H.
Jo, J. M.
Han, Y. J.
Jeong, H. S.
[J]. PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2013, 484 : 310 - 315
[10] Investigation of HTS Racetrack Coil Without Turn-to-Turn Insulation for Superconducting Rotating Machines
Kim, Young-Gyun
Hahn, Seungyong
Kim, Kwang Lok
Kwon, Oh Jun
Lee, Haigun
[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2012, 22 (03)

← 1 2 →