Influence of non-proportional load paths and change in loading direction on the failure mode of sheet metals

被引：5

作者：

Volk, Wolfram ^{[1
]}

Norz, Roman ^{[1
]}

Eder, Matthias ^{[1
]}

Hoffmann, Hartmut ^{[1
]}

机构：

[1] Tech Univ Munich, Chair Met Forming & Casting, Garching, Germany

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2020年 / 69卷 / 01期

关键词：

Forming; Anisotropy; Failure; FORMING LIMITS; STRAIN; STRESS; GROWTH; DAMAGE;

D O I：

10.1016/j.cirp.2020.03.009

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Many studies have shown that failure following non-proportional load paths cannot be predicted by a linear Forming Limit Curve (FLC), as the deformation history and a change in loading direction influence the formability and failure mode. In this paper, the different failure modes due to different load paths are investigated, for the first time, by conducting Nakajima tests with pre-formed specimens. The main objective of the investigation is to better understand the influence of pre-forming and change in loading direction on the formability. To predict this behaviour, regardless of the failure mode, the Generalized Forming Limit Concept (GFLC) is extended. (C) 2020 CIRP. Published by Elsevier Ltd. All rights reserved.

引用

页码：273 / 276

页数：4

共 17 条

[1] Micromechanical analysis on the influence of the Lode parameter on void growth and coalescence [J].

Barsoum, Imad ;

Faleskog, Jonas .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2011, 48 (06) :925-938

[2] Experiments and numerical simulations with the H-specimen on damage and fracture of ductile metals under non-proportional loading paths [J].

Brtinig, Michael ;

Gerke, Steffen ;

Zistl, Moritz .

ENGINEERING FRACTURE MECHANICS, 2019, 217

[3] A synchrotron X-ray diffraction study of non-proportional strain-path effects [J].

Collins, D. M. ;

Erinosho, T. ;

Dunne, F. P. E. ;

Todd, R. I. ;

Connolley, T. ;

Mostafavi, M. ;

Kupfer, H. ;

Wilkinson, A. J. .

ACTA MATERIALIA, 2017, 124 :290-304

[4] Investigation of the mechanical behaviour of advanced high strength steels under various loading conditions [J].

Geiger, M. ;

Merklein, M. ;

Kaupper, M. .

INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) :225-228

[5] THE INFLUENCE OF STRAIN-PATH CHANGES ON FORMING LIMIT DIAGRAMS OF A1 6111 T-4 [J].

GRAF, A ;

HOSFORD, W .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1994, 36 (10) :897-910

[6]

Hora P., 2006, P FLC, V2006, P31

[7] Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography [J].

Maire, E. ;

Bouaziz, O. ;

Di Michiel, M. ;

Verdu, C. .

ACTA MATERIALIA, 2008, 56 (18) :4954-4964

[8]

Ofenheimer A, 2005, AIP CONF PROC, V778, P460, DOI 10.1063/1.2011263

[9] Path independent forming limits in strain and stress spaces [J].

Stoughton, Thomas B. ;

Yoon, Jeong Whan .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (25) :3616-3625

[10] Metal forming beyond shaping: Predicting and setting product properties [J].

Tekkaya, A. E. ;

Allwood, J. M. ;

Bariani, P. F. ;

Bruschi, S. ;

Cao, J. ;

Gramlich, S. ;

Groche, P. ;

Hirt, G. ;

Ishikawa, T. ;

Loebbe, C. ;

Lueg-Althoff, J. ;

Merklein, M. ;

Misiolek, W. Z. ;

Pietrzyk, M. ;

Shivpuri, R. ;

Yanagimoto, J. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (02) :629-653

← 1 2 →