Preparation of PA6/nano titanium dioxide (TiO2) composites and their spinnability

被引：30
|
作者：
Zhu, MF [1 ]
Xing, Q
He, HK
Zhang, Y
Chen, YM
Pötschke, P
Adler, HJ
机构：
[1] Donghua Univ, Coll Mat Sci & Engn, State Key Lab Modificat Chem Fiber & Polymer Mat, Shanghai 200051, Peoples R China
[2] Inst Polymer Res Dresden, D-01069 Dresden, Germany
[3] Tech Univ Dresden, Inst Macromol Chem & Text Chem, D-01069 Dresden, Germany
来源：
MACROMOLECULAR SYMPOSIA | 2004年 / 210卷
关键词：
composites; mechanical properties; nano-TiO2; PA6; surface modification; spinnability;
D O I：
10.1002/masy.200450629
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
In this work, surface modification technique with coupling agents and anchoring polymerization was adopted to tailor the surface properties of nanoscaled titanium dioxide (TiO2). Ethyl glycol sols with TiO2 were prepared in order to simulate the dispersibility of differently modified TiO2 in a molten polyamide 6 (PA6) matrix. The modified TiO2 were melt compounded with PA6 and composites and fibers were prepared. The average filler diameter of 47 nm (in composites) and 44 nm (in fibers) indicated homogeneous dispersion of TiO2 in the matrix, whereas unmodified TiO2 showed agglomerated structures in the PA6 matrix. The mechanical properties of the composite fibers were improved as compared to pure PA6 fibers and composite fibers with unmodified TiO2.
引用
收藏
页码：251 / 261
页数：11
相关论文
共 50 条
  • [41] Multinanolayered PA6/Cloisite and PE/PA6/Cloisite composites: Structure, mechanical and barrier properties
    Marais, Stephane
    Lozay, Quentin
    Follain, Nadege
    Soulestin, Jeremie
    Couvrat, Nicolas
    Dargent, Eric
    COMPOSITES PART B-ENGINEERING, 2024, 271
  • [42] Fabrication of PA6/TiO2/PANI composite nanofibers by electrospinning-electrospraying for ammonia sensor
    Pang, Zengyuan
    Fu, Jiapeng
    Luo, Lei
    Huang, Fenglin
    Wei, Qufu
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2014, 461 : 113 - 118
  • [43] Investigation on Mechanical and Tribological Behaviors of PA6 and Graphite-Reinforced PA6 Polymer Composites
    Kumar, S. Sathees
    Kanagaraj, G.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2016, 41 (11) : 4347 - 4357
  • [44] Investigation on Mechanical and Tribological Behaviors of PA6 and Graphite-Reinforced PA6 Polymer Composites
    S. Sathees Kumar
    G. Kanagaraj
    Arabian Journal for Science and Engineering, 2016, 41 : 4347 - 4357
  • [45] Rheological properties of PA6 chips with different spinnability in high-speed spinning
    Jiang, Zhaohui
    Li, Chao
    Tian, Mingyue
    Zhang, Li
    Guo, Zengge
    Jia, Zhao
    Jiang, Feng
    Jin, Jian
    POLYMER BULLETIN, 2017, 74 (07) : 2787 - 2797
  • [46] Abrasive wear volume maps for PA6 and PA6 composites under dry working condition
    Mimaroglu, A.
    Sen, U.
    Unal, H.
    APPLIED COMPOSITE MATERIALS, 2008, 15 (01) : 13 - 25
  • [47] Deposition of Titanium Dioxide (TiO2) Thin Films Using In-house Nano-TiO2 Powder
    Sahdan, M. Z.
    Alias, M. S.
    Nafarizal, N.
    Hashim, U.
    2012 10TH IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS (ICSE), 2012, : 267 - 270
  • [48] Investigation of the properties of PA6/PA610 blends and glass fiber reinforced PA6/PA610 composites
    Artykbaeva, Elnura
    Durmaz, Bedriye Ucpinar
    Aksoy , Pelin
    Aytac, Ayse
    POLYMER COMPOSITES, 2022, 43 (10) : 7514 - 7525
  • [49] Rheological properties of PA6 chips with different spinnability in high-speed spinning
    Zhaohui Jiang
    Chao Li
    Mingyue Tian
    Li Zhang
    Zengge Guo
    Zhao Jia
    Feng Jiang
    Jian Jin
    Polymer Bulletin, 2017, 74 : 2787 - 2797
  • [50] Preparation of LDPE/PA6 barrier film
    Cheng, M.L.
    Pei, J.F.
    Ding, Y.H.
    Ye, J.H.
    Zhu, M.F.
    2001, Editorial Department of China Plastic Journal (15):
12345