Effects of pH value on characteristics of oxide films on 316L stainless steel in Zn-injected borated and lithiated high temperature water

被引：56
作者：
Liu, Xiahe
Han, En-Hou [1 ]
Wu, Xinqiang
机构：
[1] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China
来源：
CORROSION SCIENCE | 2014年 / 78卷
关键词：
Stainless steel; Zinc; Polarization; XPS; High temperature corrosion; Oxidation; REVISED POURBAIX DIAGRAMS; CORROSION BEHAVIOR; ELECTROCHEMICAL PROPERTIES; ALLOY; 690; 304-STAINLESS-STEEL; ZINC; SOLUBILITY; IMPEDANCE; CONSTANT; HYDROGEN;
D O I：
10.1016/j.corsci.2013.09.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of pH values from 6.9 to 7.4 on oxide films for 316L stainless steel in borated and lithiated high temperature water at 573.15 K without and with Zn injection were examined by in situ potentiodynamic polarization curves, electrochemical impedance spectra and ex situ X-ray photoelectron spectroscopy (XPS) analysis. The composition of oxide films appears slightly pH dependent: rich in chromites and ferrites at pH = 6.9 and pH = 7.4, respectively. The corrosion rate decreases significantly in the high pH value solution with Zn injection due to the formation of compact oxide films. The solubilities and structural model of oxides are proposed and discussed. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：200 / 207
页数：8
相关论文
共 50 条
[21]   Effect of surface roughness on low-cycle fatigue behaviors of 316LN stainless steel in borated and lithiated high-temperature pressurized water [J].
Ma, Yongjian ;
Zhang, Ziyu ;
Tan, Jibo ;
Wu, Xinqiang ;
Wang, Xiang ;
Han, En-Hou ;
Ke, Wei .
CORROSION SCIENCE, 2022, 209
[22]   Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt [J].
Qiu, Jie ;
Macdonald, Digby D. ;
Schoell, Ryan ;
Han, Junsoo ;
Mastromarino, Sara ;
Scully, John R. ;
Kaoumi, Djamel ;
Hosemann, Peter .
CORROSION SCIENCE, 2021, 186
[23]   Properties of oxide films formed on 316L SS and model alloys with modified Ni, Cr and Si contents in high temperature water [J].
Han, Guangdong ;
Lu, Zhanpeng ;
Ru, Xiangkun ;
Chen, Junjie ;
Zhang, Jinlong ;
Shoji, Tetsuo .
CORROSION SCIENCE, 2016, 106 :157-171
[24]   Clarifying the mitigation effect of proton irradiation on the intergranular oxidation of 316L stainless steel in high temperature water [J].
Wang, Shengkai ;
Zhang, Shihao ;
Xie, Jiayu ;
Feng, Xingyu ;
Song, Miao ;
Was, Gary S. ;
Kuang, Wenjun .
ACTA MATERIALIA, 2022, 241
[25]   Chemical composition and electronic structure of the oxide films formed on 316L stainless steel and nickel based alloys in high temperature aqueous environments [J].
Montemor, MF ;
Ferreira, MGS ;
Hakiki, NE ;
Belo, MD .
CORROSION SCIENCE, 2000, 42 (09) :1635-1650
[26]   Low-cycle fatigue behaviors of 316L austenitic stainless steels with different surface finishing in simulated pressurized water reactor primary water and an oxygenated, borated, lithiated high temperature water [J].
Xiong, Yida ;
Watanabe, Yutaka ;
Shibayama, Yuki ;
Zhong, Xiangyu ;
Mary, Nicolas .
CORROSION SCIENCE, 2021, 190
[27]   Investigation of oxide film formation on 316L stainless steel in high-temperature aqueous environments [J].
Cheng, Xuequn ;
Feng, Zhicao ;
Li, Chengtao ;
Dong, Chaofang ;
Li, Xiaogang .
ELECTROCHIMICA ACTA, 2011, 56 (17) :5860-5865
[28]   Radiolysis driven changes to oxide stability during irradiation-corrosion of 316L stainless steel in high temperature water [J].
Raiman, Stephen S. ;
Bartels, David M. ;
Was, Gary S. .
JOURNAL OF NUCLEAR MATERIALS, 2017, 493 :40-52
[29]   Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water [J].
Zhu, Ruolin ;
Wang, Jianqiu ;
Zhang, Zhiming ;
Han, En-Hou .
CORROSION SCIENCE, 2017, 120 :219-230
[30]   Effects of irradiation temperature on tritium retention in stainless steel type 316L [J].
Matsuyama, Masao ;
Zushi, Hideki ;
Hanada, Kazuaki ;
Oya, Yasuhisa ;
Hatano, Yuji .
FUSION ENGINEERING AND DESIGN, 2021, 169
12345