Microstructure in the joining zone during the friction welding of the two dissimilar steels

Purpose - The purpose of this paper is to point out the possibilities for friction welding of dissimilar steels which are used in various industries. In addition, friction welding is a welding method that is applied for executing the very responsible joints. This research is focused on friction and tribological processes in the friction plane of the two pieces during the welding. Design/methodology/approach - The present study research has been conducted based on the experimental testing of cylindrical specimens and results are analyzed. Findings - The austenite grain size is affected by several factors through the friction process phase and the compacting phase during the welding. The very fine grain is the consequence of the high degree of the plastic deformation of the near-the-contact layers even in the friction phase. The viscous layer, which is formed during the stable friction phase, is the area where the moving of matter occurs according to a very complex mechanism. Originality/value - The paper contains useful results from the area of conventional friction welding of dissimilar steels and it can be very useful to researchers and engineers who deal with similar problems.