A comprehensive error compensation system for correcting geometric, thermal, and cutting force-induced errors

被引：43

作者：

Liang, JC

Li, HF

Yuan, JX

Ni, J

机构：

[1] Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI

[2] 2041 G. G. Brown Building, University of Michigan, Ann Arbor

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 1997年 / 13卷 / 10期

关键词：

cutting force-induced error; error compensation; geometric error; thermal error; turning centre;

D O I：

10.1007/BF01179070

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

A comprehensive error compensation system has been developed to correct geometric, thermal, and cutting force-induced errors on a turning centre. The basic approach to error compensation is proposed in this paper The implementation of error compensation control and of hardware configuration of the system are also presented. A total of If geometric and thermal error components and 10 cutting force induced error component can be compensated for using this system. Performance evaluations have been carried out using actual cutting tests. Experimental results show that the diameter accuracy of the part has been improved more than 5 times and taper accuracy of the part has been improved about 5 times.

引用

页码：708 / 712

页数：5

共 4 条

[1]

CHEN JS, 1993, J ENG IND-T ASME, V115, P472, DOI 10.1115/1.2901792

[2] A GENERAL METHODOLOGY FOR MACHINE-TOOL ACCURACY ENHANCEMENT BY ERROR COMPENSATION [J].